Eletrônica

ELRS and DIN Rail Mounts: 3D Models to Print

This collection gathers STL mounts for ELRS receivers and antennas, DIN rail brackets for power supplies and boards, and wall holders for transmitters and displays. Most of the parts are small and solve one placement problem inside a larger 3D printing project. The mix is useful when you are fitting electronics into a frame, a case or a panel. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 484548 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 484548 modelos
Sobre a categoria

«ELRS and DIN Rail Mounts: 3D Models to Print»

The models fall into a few groups. Antenna mounts hold a vertical or angled antenna on a drone frame, while receiver mounts tuck a module into a bay or onto a stack. DIN rail brackets clip power supplies and control boards into an enclosure, and wall holders keep a transmitter or a display in a fixed spot. They differ mainly in how they attach: screw patterns that match a frame, zip-tie slots, or snap clips.

Before printing, open the author's page and compare the dimensions with your own part. Check the hole spacing and screw size, the connector type and angle of the antenna, and the wall thickness around the load-bearing points. Look at whether supports are needed, which material and settings the author lists, and any photos of real prints. For parts that see vibration, a slightly flexible filament is often chosen over a stiff one.

If the first search gives few results, try other words for the same object: receiver mount, antenna bracket, holder, DIN clip, rail bracket, module case. Adding the frequency band or the device class narrows the list, and related searches such as GPS mounts, power supply brackets or frame-specific mounts often lead to parts that fit the same build.

FAQ

Perguntas frequentes

What does an ELRS antenna mount do?
It fixes the antenna in a chosen position and angle on a frame or enclosure. That keeps the antenna away from carbon parts and wiring and holds the orientation the builder intended.
How do I check whether a mount fits my hardware?
Compare the hole spacing, screw diameter and overall dimensions on the model page with your own part. The antenna connector type and the angle of the mount matter as much as the footprint.
Which filament is used for these mounts?
It depends on the load and the vibration the part sees. Authors usually list the material and settings they used, so read those notes and the photos of printed parts before choosing your own.
How can I find more mounts like these?
Search with synonyms such as bracket, holder, clip or case, and add the device class or frequency band. Related topics like GPS mounts or power supply brackets often return parts from the same builds.
Relacionados
Ferramentas e equipamentos

ELRS Antenna and GPS Mounts: 3D Models and STL Files

507472 modelos
Eletrônica

ELRS Antenna Mounts for Mark 4 V2: STL Files

5721 modelos
Eletrônica

FPV Drone Antenna Mount 3D Models and STL Brackets

2736 modelos
Casa e utilidades

3D Printing Mounts: STL Wall, Desk and Holder Models

1158108 modelos
Eletrônica

Router Mounts: 3D Models for Wall and Desk

524262 modelos
Veículos

Yamaha XJ 900 3D Models and STL Parts

1120 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias