Eletrônica

MR60 Connector Mounts and Brackets: 3D Models

This collection gathers STL files for MR60 connector mounts, router wall brackets, protective caps and related holders. It helps you organize connectors, cables and small devices around a 3D printer or workshop. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 45 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 14/10/2026

Ver a coleção Mostrar todos: 1426 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 1426 modelos
Sobre a categoria

«MR60 Connector Mounts and Brackets: 3D Models»

The results fall into a few clear groups: panel-mount holders for multi-pin power connectors, wall brackets for mesh routers, protective caps and covers, and mounts for related connector families. They differ in how they attach, from screw-down panel plates to wall clips and enclosed housings. Some files include separate male and female sides, while others add ports or combine two connectors in one bracket.

When picking a file, start with the dimensions and scale, then look at the number of parts and assembly steps. The author's page may list the material, layer height, wall count, and whether supports are needed, along with photos of real prints. For connector mounts, verify pin count, plug orientation, and screw hole spacing before you slice.

To narrow the search, try synonyms such as connector mount, panel bracket, wall holder, and cable organizer. Related searches include XT-series mounts, router brackets, and protective caps, since these often use the same mounting ideas. Adding male, female, or housing can help you find a specific side or enclosure.

FAQ

Perguntas frequentes

What is an MR60 connector mount used for?
It holds an MR60 connector in a panel, wall, or enclosure so the plug can be attached and removed without pulling on wires. The model page usually shows the cutout and screw pattern.
How do I choose between a panel mount and a wall bracket?
Panel mounts are for flat surfaces and cutouts, while wall brackets often hold a device or connector against a wall. Check the dimensions and mounting method in the files.
What should I check before printing an MR60 holder?
Check the connector orientation, pin count, screw hole spacing, and the material and layer settings the author lists. Photos of real prints can help you see how the part is assembled.
Can I scale an MR60 mount to fit another connector?
Scaling changes both the outer shape and the connector opening, so it may no longer match the plug. Look for a model made for that connector family or adjust the opening in the source file.
Relacionados
Eletrônica

FPV Mounts and PVC Connectors: 3D Models

3368 modelos
Eletrônica

RM 710 3D Models: Mounts, Holders and Supports

975 modelos
Eletrônica

FPV Drone 3D Models: Frames, Wings, Mounts

12982 modelos
Eletrônica

Infiray Thermal Camera 3D Models and STL Files

1574 modelos
Eletrônica

3D printing enclosures for Doppler sensor boards

2487 modelos
Eletrônica

Voltmeter 3D Models: Cases, Panels and Mounts

2483 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias