Eletrônica

STL adapters for cone air filters (нулевик)

This collection gathers 3D models that connect a cone air filter, often called a нулевик, to an engine intake. The files are made for 3D printing and cover adapters, flanges and small mounting parts. It helps when the original intake part no longer matches the filter you have. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 22 modelos de 2 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 12/10/2026

Ver a coleção Mostrar todos: 1393 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 1393 modelos
Sobre a categoria

«STL adapters for cone air filters (нулевик)»

The models fall into a few groups. Some are adapters that bolt to the throttle body, others are plates that carry an airflow sensor, and a third group is made of rings and couplers that step between two diameters. Brackets and simple holders appear as well, usually to keep the intake pipe from moving. The difference between them is mostly the mounting surface: a round flange, an oval one, or a plate with a specific bolt pattern.

Before printing, measure the inner diameter of the filter neck and the bolt spacing of the surface it attaches to, since a small difference makes the part useless. Check the wall thickness and whether the author notes supports for overhangs. Engine bays get hot, so look at the material and settings the author lists, and at photos of real prints, rather than assuming any filament will do.

If the results are thin, try other words: transition ring, flange, sensor housing, intake coupler, throttle body spacer. Related topics such as cold air intake, airbox replacement or intake piping often lead to the same parts. Adding the engine code or the car platform to the query narrows the list faster than browsing a general car category.

FAQ

Perguntas frequentes

What exactly is a нулевик adapter?
It is a printed part that joins a cone air filter to the intake, either directly at the throttle body or through a flange that holds an airflow sensor. Its job is to match two different mounting shapes and diameters.
How do I pick the right diameter?
Measure the filter neck and the intake opening with calipers, then compare both numbers with the dimensions in the model description. Bolt spacing matters as much as the diameter.
Which filament should I use?
Authors usually list the material they printed with, often PETG, ABS, ASA or a nylon blend. Check the temperatures the part will see in the engine bay and read the author's notes before choosing.
Do these parts need supports?
It depends on the shape: flat flanges often print without them, while tall adapters with overhangs may need them. The model page usually states whether supports were used and where.
Relacionados
Veículos

3D Models for a VAZ 2114 Air Filter Box

2067 modelos
Eletrônica

3D Models for Radio Covers and Desk Accessories

542 modelos
Eletrônica

Moth-Themed 3D Models and Modular Systems

1374 modelos
Eletrônica

Sealed Cable Connector 3D Models and STL Files

11349 modelos
Eletrônica

RJ45 Ethernet 3D Models: STL Parts for Cables and Ports

1316 modelos
Eletrônica

8-Inch Speaker Spacers: 3D Models and STL Files

12583 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias