Ferramentas e equipamentos

Pipe Clamp 90 Degree: 3D Models and STL Files

This collection gathers 3D models for pipe clamps built around a 90-degree angle, from corner brackets to snap-on clips and screw-mounted holders. Most files are small parts that fit a desktop 3D printer, so a set can be printed in one session and adjusted to the pipe diameter you work with. The listings also cover adapters that turn an existing clamp into an angle jig. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 15/10/2026

Ver a coleção Mostrar todos: 4961 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 4961 modelos
Sobre a categoria

«Pipe Clamp 90 Degree: 3D Models and STL Files»

The angle parts split into a few families. Corner clamps and fixing brackets hold two workpieces or a pipe at a right angle, often designed around a specific clamp body or jaw width. Snap-on clips and conduit holders wrap the pipe and lock it to a surface, sometimes with a zip-tie channel or a single screw hole. Screw-mounted holders and two-hole straps sit flat against a wall or board, while adapters and extensions attach to clamps you already own.

Before printing, open the model page and read what the author states. Check the inner diameter or the pipe size the part is drawn for, the wall thickness, and whether the geometry needs supports. Look at the material and layer settings the author lists, since a clamp under load behaves differently in a stiff filament than in a flexible one. Photos of real prints show how the part seats on the pipe better than a render does.

Sizing is the main variable, so search by the diameter or trade size you need rather than by the word clamp alone. Terms such as conduit clip, pipe holder, corner bracket, right-angle jig, pipe strap or clamp adapter lead to different designs of the same idea. Adding the pipe standard, the clamp brand family or the mounting method narrows the results further, and related topics like cable management or workshop jigs often contain parts that work the same way.

FAQ

Perguntas frequentes

What pipe sizes do these 90-degree clamp models cover?
Listings range from small tubing and conduit up to larger drainage pipes, and many are parametric so you can enter a diameter. Check the stated inner diameter on the model page and compare it with the actual outer diameter of your pipe.
Do these clamps need supports when printed?
It depends on the orientation the author used. Parts with a flat base and no overhangs usually print without supports, while clips with a closed ring or a deep channel often need them. The model page usually states the orientation the author recommends.
Which filament works for a pipe clamp?
Stiff filaments such as PLA or PETG are common for brackets that only locate a pipe, while parts that flex or snap over a pipe are often printed in a more ductile material. Read the material note on the author's page and test the fit before using the part under load.
Can I adapt a clamp I already own to hold a pipe at 90 degrees?
Yes, several models in this collection are adapters or extensions shaped to fit a specific clamp jaw type. Measure the jaw width and the pipe diameter, then compare those figures with the dimensions given on the model page.
Relacionados
Ferramentas e equipamentos

Pipe Clamp 3D Models: STL Files for Tubes and Conduit

84869 modelos
Ferramentas e equipamentos

Pipe Clamp 3D Models for Drain and PVC Pipes

5223 modelos
Ferramentas e equipamentos

3D Printable Clamps: STL Models for Shop and Desk

172350 modelos
Casa e utilidades

Vertical Pipe Clamp Mount Hook: 3D Models and STL Files

4451 modelos
Militar

T90 Tank 3D Models and STL Files

48128 modelos
CNC e fresadoras

3D Printing Corner Jigs and Pipe Clamps for CNC

2429 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias