Hobby e makers

RC Drive 3D Models: Jets, Gears and Shafts

This collection covers STL files for RC drivetrain parts: jet units for boats, gears, drive shafts, hex adapters and motor mounts. It helps when a stock part breaks or when you build a drive from scratch and use 3D printing to fill the gap. Each listing leads to its own source page, where the author describes the part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 5 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 14/10/2026

Ver a coleção Mostrar todos: 56760 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 56760 modelos
Sobre a categoria

«RC Drive 3D Models: Jets, Gears and Shafts»

Boat jet units sit next to land-vehicle parts, and the two are built differently. Jet housings and impellers are shaped around water flow and a motor shaft, while car parts such as drive shafts, hex adapters and steering knuckles are defined by their mounting pattern and axle diameter. Gear sets, belt pulleys and motor boxes appear in both worlds, and a few direct-drive extruder mounts turn up because they share the word "drive" but belong to 3D printer hardware.

Before printing, compare the part against your own hardware: scale, shaft diameter, hex size, hole spacing and the number of separate pieces. Read the author's notes on assembly, bearings and screws, and check whether supports are needed and which material and settings are listed. Photos of real prints on the model page usually show more than the render, especially for thin housings and loaded gears.

Search results improve when you name the exact component instead of the general term. Try impeller, jet unit, gearbox, transmission, differential, axle, coupler, pulley, motor mount or hex hub, and add the scale or shaft size you need. Related topics such as hulls, chassis, wheels, servos and speed controllers often lead to parts that fit the same build.

Loaded gears and shafts are usually printed in a stronger material than display parts, and authors often state which one they used. Layer orientation matters: a gear printed flat behaves differently from one printed on its side, so check how the model is placed in the file. If a part is split for printing, plan the glue or screw joints before you start.

FAQ

Perguntas frequentes

What should I measure before printing an RC drive part?
Shaft diameter, hex size, mounting hole spacing and the overall scale of your model. Compare those numbers with the dimensions the author lists on the model page.
Which material works for gears and drive shafts?
Authors usually name the material they used, often a tougher filament or resin for loaded parts. Check that note and the layer orientation shown in the file before choosing yours.
Why do direct-drive extruder mounts appear in an RC drive search?
They share the word "drive" but belong to 3D printer hardware, not to a vehicle. Filter them out by adding car, boat or truck to your query.
How do I find a gear or adapter that matches my build?
Search by dimensions and component name, such as module, tooth count, shaft bore or hex size. Related terms like pulley, coupler and hub often return the same family of parts.
Relacionados
Peças para impressoras

3D Models for Drive Mechanisms and Extruders

21766 modelos
Hobby e makers

RC 3D Models in STL: Cars, Planes, Tanks, Boats

9390 modelos
Hobby e makers

RC 1/12 3D Models: STL Bodies and Chassis Parts

460794 modelos
Hobby e makers

RC 1:16 3D Models: Tanks, Cars and Parts to Print

446601 modelos
Hobby e makers

RC Numbers and Markers: 3D Models and STL Files

51028 modelos
Hobby e makers

RC Plus 3D Models: Mounts, Bodies and Parts

4018 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias