Objetos

3D Models for Rear View Camera Housings and Mounts

This collection gathers 3D printing files for rear view camera housings: brackets and mounts shaped around a particular vehicle, protective covers and shields, and hoods that cut glare for dashcams and mirror cams. It also includes more general camera enclosures, such as roof mounts and small board-camera boxes with a threaded lens opening. The mix is useful when a camera needs to sit at a fixed angle, stay clear of dirt and spray, or be moved away from a body panel that blocks the view. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 8 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 144107 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 144107 modelos
Sobre a categoria

«3D Models for Rear View Camera Housings and Mounts»

The files fall into a few groups. Vehicle-specific housings follow the contours of a tailgate, a double back door or a mirror base, so the camera ends up at the angle the bodywork allows. Protective covers and shields are simpler shells that sit over an existing camera and take the brunt of road spray and reflections. Hoods and anti-glare covers extend forward of the lens to shade it, while adjustable holders and extenders add length or rotation so the camera can be aimed after installation. A smaller group covers cameras away from the car, including roof-mounted enclosures and compact housings for board cameras with a threaded lens mount.

Before printing, read the author's model page for the details that decide whether the part works for your setup: overall dimensions and scale, the number of separate pieces and how they join, whether supports are needed, and the material and print settings the author lists. Check how the camera body is held, whether screws, clips or an existing bracket are used, and how the cable is meant to leave the housing. Photos of real prints show how the part sits once installed and where thin walls or overhangs may need attention.

If the first search is too narrow, try the words people use for the same part: backup camera cover, reversing camera housing, camera hood, camera guard, camera bracket or camera mount. Adding the body area helps, for example tailgate, trunk lid, rear door, roof or mirror, and adding the vehicle type narrows it further. Related searches worth trying include dashcam accessories, camera lens hoods, board camera enclosures and threaded lens housings, since these often use the same mounting ideas.

FAQ

Perguntas frequentes

What is a rear view camera housing used for?
It holds a camera at a fixed position and angle on the vehicle and shields the lens from spray, dirt and stray light. Some designs replace a factory mount, while others add a cover over a camera that is already installed.
What should I measure before printing a camera housing?
Measure the camera body, the lens position and the space available around the mounting point. Compare those figures with the dimensions on the model page, and check the wall thickness and how the cable will be routed.
Which material works for a part exposed to weather and sunlight?
Authors usually list a material and settings on the model page, and those notes are the first thing to follow. Parts mounted outside are often printed in materials chosen for outdoor exposure, with enough walls to resist vibration.
How do I find a housing for a specific car?
Search with the body area and the part name, such as rear door camera housing or trunk camera mount, and try synonyms like backup, reversing or reverse camera. If nothing matches exactly, look at adjustable holders and universal covers instead.
Relacionados
Veículos

BMW Rear Camera Housing STL Models

3120 modelos
Objetos

3D Models for CCTV and Car Rear Camera Housings

1826 modelos
Veículos

Rear View Camera Brackets: 3D Models and STL Files

224898 modelos
Gadgets

3D Models for Car Rear Camera Covers and Shields

3185 modelos
Eletrônica

3D Models for Housing and Enclosure Parts

19076 modelos
Gadgets

Camera 3D Models: Mounts, Stands and STL Parts

25119 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias