Casa e utilidades

Speaker Podium and Stand 3D Models to Print

This collection gathers STL files for speaker podiums and stands: car speaker pods and spacers, angled desktop risers, soundbar mounts and holders for bookshelf speakers. It is useful when a speaker needs a specific height, tilt or mounting point that no off-the-shelf part provides. Each listing comes from a different author, so the details of a model matter more than the category it sits in for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 9 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 14/10/2026

Ver a coleção Mostrar todos: 98002 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 98002 modelos
Sobre a categoria

«Speaker Podium and Stand 3D Models to Print»

The models differ mainly in what they hold and how they attach. Car pods and spacers are shaped around a door or shelf opening and sometimes include resonators or a mounting flange. Desktop stands usually set a fixed tilt, often around 15 to 20 degrees, to aim a driver toward the listener. Soundbar mounts and home theater holders work with brackets, poles or wall plates, while small risers simply lift a portable speaker or a piece of audio gear off a surface.

Before printing, compare the model against your actual speaker. Check the driver diameter and bolt spacing, the outer footprint, the tilt angle and the height it adds, and whether the part is one piece or several that need assembly. Look at the author's notes on supports, material and settings, and at photos of real prints, since tall or angled parts behave differently depending on orientation. For load-bearing stands, wall thickness and infill matter as much as the shape.

If the results are thin, try other words for the same object: pod, spacer, adapter, riser, bracket, holder or mount. Adding a size, an angle or a vehicle model narrows the list quickly. Related searches such as soundbar, home theater, desk setup or studio monitor often surface parts that the main term misses.

A model that looks right in the preview can still need edits: hole positions, screw sizes and clearances are worth measuring twice. If a stand is too tall or too shallow for your space, scaling changes the fit of every opening, so adjust with care and re-check the dimensions after any change.

FAQ

Perguntas frequentes

How do I check that a speaker stand matches my speaker?
Measure the driver diameter, the bolt circle or mounting holes, and the footprint you have room for. Compare those numbers with the dimensions the author lists, and look at the photos of printed parts for scale.
Which material works for a speaker stand?
It depends on the load and the temperature where the part sits. PLA is stiff and easy to print, PETG tolerates more impact and warmth, and thicker walls or higher infill help where the stand carries weight.
Do these models need supports?
Some do, especially angled faces, overhangs and mounting flanges. The author's page usually states whether supports are needed and which orientation was used for the shown print.
Can I scale a model to fit my speaker?
Scaling shifts every dimension, including screw holes and slots, so a scaled part may no longer line up. It is usually better to pick a model close to your measurements and edit only the openings you need.
Relacionados
Eletrônica

K 1600 B Rear Speaker Pods: 3D Models and STL Files

1191 modelos
Veículos

Rear Speaker Adapters: 3D Models and STL Files

1530 modelos
Eletrônica

Motorcycle Rear Speaker Pod 3D Models and STL Files

1419 modelos
Eletrônica

Tweeter Podium and Display Base 3D Models

1219 modelos
Eletrônica

Speaker 3D Models: Horns, Housings, Mounts

32843 modelos
Veículos

BMW 1600 and K1600 3D Models and STL Parts

12709 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias