Gadgets

Sunshield 3D Models: STL Shades for Screens and Cameras

This collection gathers 3D-printable sunshields, hoods and visors made for screens, lenses and cameras. Most entries are small, flat or shell-shaped parts that block direct light, so they print quickly on a home 3D printer. The variety is wide: from dashboard visors to hoods for outdoor cameras, which makes it worth browsing by device type first. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 1892 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 1892 modelos
Sobre a categoria

«Sunshield 3D Models: STL Shades for Screens and Cameras»

The models split roughly by what they shade. Camera and drone sunshades wrap around a lens or a display, car visors extend or hood a dashboard screen, and outdoor hoods sit over a fixed security camera. Eyewear glare shields and handheld screen shades are smaller and often fold or clip on. Each group differs in how it mounts, so read the description before comparing shapes.

When choosing, check the dimensions the author lists against your own device, since a few millimetres decide whether a hood sits flush or rattles. Look at the number of parts and whether they need assembly or fasteners, and note the material and settings the author mentions, as thin walls and long overhangs behave differently in different filaments. Photos of real prints show how the part actually sits on the device.

To narrow the results, try synonyms such as sun hood, visor, glare shield, screen shade or splash guard, and add the device type rather than a brand. Related searches like lens hood, dew shield or camera cover often return similar geometry. If nothing matches, a plain box or angled shell modelled to your own measurements is a common fallback.

FAQ

Perguntas frequentes

What is a sunshield used for?
It blocks direct light from a screen, lens or sensor so the display stays readable or the image keeps contrast. Most designs are simple shells or visors that clip, screw or tape onto the device.
What should I check before printing a sunshield?
Compare the listed dimensions with your device, look at the number of parts and how they join, and read the material and layer settings the author gives. Photos of printed parts help judge wall thickness and overhangs.
Which material works for outdoor sunshades?
Authors usually state a preference; ASA and PETG are common where sunlight and heat are involved, while PLA is often used for indoor screens. Check the model page for the settings the author lists.
How do I find more models like these?
Search for related terms such as sun hood, glare shield, screen visor, dew shield or camera cover, and add the device type. Browsing the camera and car accessory categories also surfaces similar parts.
Relacionados
Gadgets

BFT Sunshield and Remote Case 3D Models

112 modelos
Gadgets

Sunshield and Sun Hood 3D Models to Print

1251 modelos
Ferramentas e equipamentos

Camera Sunshield and Sun Hood 3D Models

2580 modelos
Jardim e horta

Gate 3D Models: Torii, Terrain Doors and Fences

1523 modelos
Gadgets

3D Models for Sun Visor Remote Mounts and Car Sunshades

1521 modelos
Gadgets

3D Models for BFT Remote Covers and Fiat Visor Parts

1542 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias