Ferramentas e equipamentos

Tube Clips for 3D Printing: 50mm Pipe and Hose STL

This collection gathers 3D models for clips that hold tubes, pipes and hoses, with a focus on the 50mm size and the neighbouring diameters that often share the same design. The range covers workshop plumbing, PTFE and Bowden tubing, and mounts for cartridges or canisters, so you can compare a few approaches before starting a 3D printing job. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 45 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 12/10/2026

Ver a coleção Mostrar todos: 7206 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 7206 modelos
Sobre a categoria

«Tube Clips for 3D Printing: 50mm Pipe and Hose STL»

Most entries fall into a few groups. Pipe and hose clips wrap around a round section and usually take a screw or bolt through a base; locking clips are shaped for thin flexible tubing such as PTFE or Bowden lines and grip by snapping over the wall; parametric clamps let you enter a diameter and generate the matching jaw. There are also holders for wider items like cartridges or canisters, and small clips that route cables or LED strips along a tube rather than clamping the tube itself.

When you open a model page, check the stated inner diameter and whether it is measured on the tube, the pipe or the outer sleeve, since a 50mm label can refer to either. Look at the number of parts, whether the design prints as one piece or needs assembly, and whether the author lists supports, material and settings. Photos of real prints help you judge wall thickness, how the clip flexes, and where a screw hole sits.

To widen or narrow the results, try the terms people use for the same object: pipe clamp, hose clamp, tube holder, cable clip, snap-fit mount, or the nominal diameter on its own. Adding a context such as aquarium, water cooling, CNC, cable management or workshop bench brings up designs built for that setup. If a diameter you need is missing, search for parametric or fully adjustable versions and scale the model to your tube.

FAQ

Perguntas frequentes

What does the 50mm in a tube clip model refer to?
It is usually the nominal diameter the clip is built around, but authors differ: some measure the tube outside, others the pipe bore or an outer sleeve. Read the description and check the drawing or dimensions on the page before printing.
Which material works for clips that flex?
Clips that snap over a tube need some elasticity, so many authors suggest a filament that bends without cracking and give their own settings. Rigid clips that only hold a screw-mounted base are less demanding.
Can I resize a clip for a different tube diameter?
Scaling changes every dimension, including wall thickness and screw holes, so a small change is safer than a large one. Parametric models are the better route when you need a noticeably different diameter.
Do these clips need supports?
It depends on the shape: flat-backed clips often print without them, while a full ring or an overhanging jaw may need support inside the opening. The author's notes and print photos usually show which orientation was used.
Relacionados
Ferramentas e equipamentos

Clips for 3D Printing: Bag, Cable and Panel STL Models

214259 modelos
Ferramentas e equipamentos

Pipe Clamp 3D Models for Drain and PVC Pipes

5223 modelos
Eletrônica

50mm x 25mm 3D Models and STL Files

11661 modelos
Peças para impressoras

Tube Connector 3D Models and STL Files

40013 modelos
Ferramentas e equipamentos

Round Tube Mounts: 3D Models and STL Files

11478 modelos
Ciência e educação

Test Tube 3D Models: Racks, Stands and Vases

7689 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias