Miniaturas e wargame

Talon 3D Models: Dart Mags, V-Tails and Props

This collection gathers 3D models that carry the Talon name or use it as a format: short-dart magazines, blaster parts, V-tail reinforcement pieces and a few character figures. Most files are aimed at FDM 3D printing, and the mix shows how far one keyword spreads across hobbies. Use it as a starting point, then narrow down to the part you actually need. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 46 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 1560 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 1560 modelos
Sobre a categoria

«Talon 3D Models: Dart Mags, V-Tails and Props»

Short-dart magazines and magwells form the largest group, usually split by dart length and by whether the body prints upright or on its side. Blaster projects sit next to them: shells, wire runs and small brackets that only make sense as part of a specific build. The remaining entries are unrelated in function — airframe tail reinforcements, display figures and prop weapons — and share little beyond the keyword.

On the author's model page, check the stated dart length, the number of parts and whether the file expects screws, springs or magnets you have to source separately. For tail and structural pieces, look at wall thickness and the orientation the author recommends, since layer direction decides how a thin bracket behaves under load. Figures and props are the opposite case: scale, hollowing and support placement matter more than strength.

Searching for synonyms helps: magazine, mag, magwell, short dart, half dart, blaster, flywheel, V-tail, tail boom, reinforcement. Adding a format or scale word, such as 1/6 or a dart length, cuts the results quickly. If a term returns little, try the object instead of the name — the same part is often listed under the assembly it belongs to rather than the label it carries.

FAQ

Perguntas frequentes

What is a Talon magazine in 3D printing?
It is a short-dart magazine format used in hobby dart blasters. Files in this collection cover the magazine body, the follower and sometimes a matching magwell, so check the dart length and capacity the author states.
Which parts of a blaster build are usually printed?
Shells, magazine bodies, brackets and small wire or hardware holders are common. Springs, screws, motors and electronics are normally bought separately, so read the parts list on the model page first.
How should a V-tail reinforcement be printed?
These parts are thin and carry load, so orientation and wall count matter more than infill percentage. The author's page usually notes the material and the direction the part should sit on the bed.
Can a figure or prop model be scaled up or down?
Scaling changes wall thickness and hole sizes, so small pins and sockets may need adjustment afterwards. If you resize, do it in the slicer and check the thin sections before committing to a long print.
Relacionados
Brinquedos e bonecos

Talon 3D Models: Knives, Aircraft and Nerf Mags

5525 modelos
Veículos

Micro Talon 3D Models: Airframes, Mounts and Mods

10675 modelos
Hobby e makers

Micro Talon 6S STL 3D Models for RC Builds

350875 modelos
Miniaturas e wargame

Battle Fleet Gothic 3D Models and STL Ships

2586 modelos
Miniaturas e wargame
Miniaturas e wargame

Porsche 911 GT3 RS 3D Models and STL Wall Art

3668 modelos
Miniaturas e wargame

Funny Figurine 3D Models: STL Files to Browse

4343 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias