Eletrônica

Wind Generator with Gearbox: 3D Models and STL

This collection gathers STL files for wind generators that use gearboxes or multiplier stages. You will find horizontal and vertical turbines, decorative windmills, and separate generator or gearbox assemblies. It helps you compare how different designs handle rotation speed and mounting before you start a 3D printing project. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 8 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 15660 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 15660 modelos
Sobre a categoria

«Wind Generator with Gearbox: 3D Models and STL»

Horizontal-axis designs often place a gear ratio between the rotor and the generator, while vertical-axis versions may integrate the generator near the base. Garden windmills and decorative turbines usually focus on the rotor and tower, whereas functional builds include mounts, shafts, and bearing seats. Some projects center on the gearbox itself, such as planetary or epicyclic multiplier stages, and can be adapted to different rotors.

Before printing, check the stated rotor diameter, gear ratio, and number of parts, because these determine the overall scale and the loads on the shaft. Look at whether the author lists bearings, magnets, wire, or fasteners that are not printed, and review photos of real prints to judge clearances. For gearbox parts, layer orientation and tolerances matter: small teeth and thin walls may need slower speeds or a different nozzle.

To narrow the results, try synonyms such as wind turbine, windmill, VAWT, HAWT, and gearbox or multiplier. Related searches include axial flux generator, planetary gear, yaw turbine, and generator mount. Combining a rotor type with a mechanism term usually gives a more focused set than a broad wind generator query.

FAQ

Perguntas frequentes

What does a gearbox change in a 3D-printed wind generator?
It adjusts the rotational speed between the rotor and the generator. A multiplier stage can increase generator rpm, while a reducer lowers it for higher torque.
Which parts are usually not 3D printed?
Bearings, magnets, coils, wire, shafts, and fasteners are often bought separately. The model page should list these extra components.
How do I choose between horizontal and vertical axis designs?
Horizontal turbines need a yaw mechanism or tail to face the wind, while vertical designs accept wind from any direction. The choice depends on your site, mounting space, and the generator you plan to use.
Can I adapt a gearbox model to a different rotor?
Some parametric or modular projects allow changes to shaft diameter, gear ratio, or mounting holes. Check the author's notes for editable dimensions and required hardware.
Relacionados
Objetos

Wind Turbine 3D Models and STL Files

11927 modelos
Objetos

3D Models of Gear Reducers and Gearboxes to Print

133033 modelos
Ferramentas e equipamentos

3D Models of 3:1 Gear Reducers and STL Files

11764 modelos
Ferramentas e equipamentos

Trimmer Reducer 3D Models and STL Parts

2579 modelos
Ferramentas e equipamentos

Planetary Gearbox STL Models for 3D Printing

46399 modelos
Objetos

Worm Gearbox 3D Models and STL Files

41691 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias