Casa e utilidades

3D Models for Wire and Cable Management

This collection gathers STL files that deal with wires: organizers, wall mounts, spools and small brackets for machines and electronics. It helps when loose cables need a fixed route, a coil or a tidy corner instead of a tangle. Most parts are small and print quickly on a desktop 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 15/10/2026

Ver a coleção Mostrar todos: 19256 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 19256 modelos
Sobre a categoria

«3D Models for Wire and Cable Management»

The models split into a few practical groups. Organizers and clips hold several cables along a desk, shelf or frame, while wall and ceiling mounts fix a single run in place, sometimes with a pass-through cover for a drilled hole. Spools and winders turn a long cord into a neat coil, and brackets support wiring inside printers, control boxes or model setups.

When choosing a file, look at the cable diameter and the number of cables it accepts, since a clip sized for one thin lead will not hold a bundle. Check the wall thickness and how the part is fastened — screw holes, adhesive face or a clamp — and read the author's notes on material and orientation. Photos of real prints show how the geometry behaves at corners and thin sections, and the page usually states whether supports are needed.

If the first results feel narrow, try the words people use for the same object: cable clip, cord holder, wire guide, grommet, strain relief, spool, winder or pass-through. Adding a place or a device narrows it further — desk, wall, ceiling, printer, breadboard, model railway. Related topics such as cable management boxes, LED profiles and servo or limit-switch mounts often contain the same fittings.

FAQ

Perguntas frequentes

What should I measure before printing a cable holder?
The outer diameter of the cable or the bundle, and the thickness of the surface it attaches to. A clip that grips too tightly can pinch a lead, and one that is too loose lets the run slide.
Do these wire parts need supports?
It depends on the shape. Flat clips and plates usually print without them, while hooks, overhangs and enclosed channels may need supports or a different orientation. The author's page often says which way the model was printed.
Which material works for clips and mounts?
Many people use PLA for indoor parts that carry no load, and PETG or ABS where the clip flexes or sits near heat. Check what the author lists, then test one piece before printing a full set.
How do I search for a specific wire fitting?
Describe the function rather than the object: wire guide, strain relief, grommet, spool or bracket. Adding the device or the surface, such as a printer, a wall or a breadboard, brings more relevant results.
Relacionados
Eletrônica

3D Models for Fixing and Routing Wires

11835 modelos
Veículos

Car Wire Clip 3D Models: Interior, RC, and Vent

289137 modelos
Veículos

Car Wire Clip 3D Models and STL Files

213286 modelos
Casa e utilidades

Wicker Basket 3D Models for 3D Printing

14453 modelos
Casa e utilidades

Large Container 3D Models: STL Boxes and Bins

5201 modelos
Casa e utilidades

Soap Case STL Models for 3D Printing

2725 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias