Veículos

BMW Bumper Covers and Plugs: 3D Models to Print

This collection gathers STL files for BMW bumper covers, including tow hook caps, rear plugs, and trim pieces. You can find parts for different generations, from front bumper inserts to support brackets. It helps you replace missing or damaged covers with a printed part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 5 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 11/10/2026

Ver a coleção Mostrar todos: 63773 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 63773 modelos
Sobre a categoria

«BMW Bumper Covers and Plugs: 3D Models to Print»

Caps for the tow hook on the front bumper are shaped to fit around the opening for a tow eye, while covers for the rear bumper often fill a rectangular or round recess. Trim caps and molding pieces sit along the bumper surface, and support brackets are structural parts that hold the bumper in place. Each type has its own mounting points, so the geometry differs even when the purpose seems similar.

When you choose a model, check the listed dimensions and scale against your car's bumper. Look at the number of parts and whether assembly is required, and see if the author mentions supports. The material and print settings on the model page can help you match the finish and strength you need. Photos of real prints show how the part looks after printing.

To narrow the results, try different terms such as bumper plug, cover for the tow hook, or trim cap. You can also search for specific areas like front or rear, and combine with the model series if you know it. Related topics include bumper brackets, washer caps, and molding clips. Adding the material or printer type may also help.

FAQ

Perguntas frequentes

What is a bumper cover or plug for a BMW?
It is a small part that fills an opening in the bumper, such as a tow hook recess or a trim gap. It can also be a support bracket that holds the bumper in place. These parts are often lost or damaged, so a printed replacement can restore the look.
How do I find the right cover for my BMW?
Start by identifying the area of the bumper, such as front or rear, and the type of opening. Then compare the model's dimensions and mounting points with your car's bumper. The author's page usually lists the series or generation the part fits.
Can these parts be printed in different materials?
Yes, the choice depends on where the part goes and how much stress it takes. Common materials include PLA for display pieces and PETG or ABS for parts that need more durability. Check the author's recommendations for settings.
What should I check before printing a bumper cover?
Look at the model's scale, number of parts, and whether supports are needed. Review the material and print settings the author lists. Photos of real prints can show how the part fits and looks.
Relacionados
Veículos

Mazda 3 Bumper Plug and Cap STL Models

987722 modelos
Veículos

Mazda Bumper Cap and Cover STL Models

50564 modelos
Veículos

Ford Focus 2 Bumper Plug STL Models

337657 modelos
Veículos

RAV4 Bumper Plug and Cover 3D Models to Print

12375 modelos
Veículos

3D Models of Bumper Plugs and Caps for PE8W

2757 modelos
Objetos

Opel Bumper Cap 3D Models and STL Files

1404569 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias