Gadgets

3D Models for Radio Clips and Mounts

This collection gathers STL files for clips and mounts used with radios, from belt attachments to vehicle brackets. It helps you find a replacement part or a custom holder when a stock clip breaks or does not fit your setup. Check dimensions and mounting points before you start a 3D printing job. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 11823 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 11823 modelos
Sobre a categoria

«3D Models for Radio Clips and Mounts»

Belt clips for handheld radios usually rely on a spring arm and a screw or pin attachment, while visor and dashboard mounts use brackets that hook over a panel. Handlebar and roll-bar clips are shaped around a tube and often include a clamp or strap. Car stereo clips and trim retainers are smaller and follow the contours of a dashboard opening, and microphone clips focus on a simple jaw or ring.

On the author's model page, check the radio or stereo model, the mounting surface, and whether the clip is a direct replacement or an adapter. Look at the number of parts, assembly steps, and whether supports are needed for overhangs. The material and settings the author lists matter because clips flex and wear, so a stiff or brittle filament may not survive repeated use.

To narrow results, try synonyms such as belt clip, visor mount, radio holder, mic clip, and replacement bracket. Related searches include walkie-talkie accessories, car stereo removal keys, dashboard mounts, and off-road vehicle radio mounts. If a result is close but not exact, look for remixes or variants that change the attachment point or tube diameter.

FAQ

Perguntas frequentes

What should I measure before printing a radio clip?
Measure the radio body, belt width, tube diameter, or dashboard opening that the clip must fit. Also check screw hole spacing and the thickness of the mounting surface.
Can a 3D printed clip replace a broken stock clip?
It can work as a replacement if the model matches the attachment points and the load it carries. Check the author's photos and notes to see how the part is installed.
What material works for clips that flex?
Flexible filaments are often used for spring arms, while rigid filaments suit brackets that do not bend. The author's recommended material and settings are a useful starting point.
How do I find a mount for a specific radio or car stereo?
Search by the device type, mounting location, and part name, such as belt clip, visor mount, or dashboard bracket. Try related terms like holder, retainer, and adapter if the first search is too narrow.
Relacionados
Ferramentas e equipamentos

3D Models of Clamps and Clips for Printing

263483 modelos
Gadgets

Camera Clip 3D Models: Mounts and Holders

5356 modelos
Ferramentas e equipamentos

3D Models of Clamps and Tool Holders to Print

266735 modelos
Eletrônica

Car Stereo Frame 3D Models for Printing

71092 modelos
Gadgets

Camera Mount Clamps: 3D Models and STL Files

12672 modelos
Esportes e fitness

Paddle Clip STL Files for Kayak and SUP 3D Printing

74629 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias