Nesneler

313 mm Wheelbase RC 3D Models and STL Files

This collection gathers 3D models tied to the 313 mm wheelbase and nearby measurements. You will find RC bodies and chassis parts, scale ordnance, webcam mounts, and workshop aids. The files are useful when you need a starting point for 3D printing a specific fit or detail. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 1887 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1887 model
Kategori hakkında

«313 mm Wheelbase RC 3D Models and STL Files»

The RC-related entries focus on bodies, chassis rails, leaf spring setups, and roll cages for a 313 mm wheelbase. Scale ordnance covers shells, guns, and kit cards that often use different print orientations and part counts. Camera mounts and workshop aids are smaller functional prints, while profiles and hardware cover structural or measuring tasks.

When choosing a model, check the stated dimensions and scale against your project, then review the number of parts and whether assembly is required. Look at the author's notes for support needs, material suggestions, and slicer settings, and compare those with photos of actual prints. For moving parts or load-bearing pieces, confirm wall thickness and orientation before committing filament.

To narrow results, try synonyms such as wheelbase, chassis, body shell, or scale RC, and combine them with the measurement you need. Related searches can include leaf springs, roll cages, camera brackets, measuring tools, and aluminium profiles. If a result is too broad, add terms for the part type, mounting method, or target device.

FAQ

Sıkça sorulan sorular

What does 313 mm refer to in these models?
It usually refers to the wheelbase of a scale RC body or chassis, measured between the front and rear axle centers. Some entries use the same number for a part length or spacing, so check the model page for the exact dimension.
How do I choose an RC body for a 313 mm wheelbase?
Compare the body's listed wheelbase with your chassis and check the mounting points. Also review the body's width, height, and cut lines before printing.
What should I check before printing a scale ordnance model?
Look at the part count, orientation, and whether the author recommends supports. Small barrels and thin details may need a different scale or slicer profile.
Can I adapt a model if my measurement is slightly different?
You can scale the model in the slicer, but this changes wall thickness and fit. Check the author's notes for tolerances and test a small section first.
İlgili
Hobi ve kendin yap

40 mm 3D Models and STL Files to Explore

89237 model
Ev ve yaşam

3D-модели для 82 мм формата: лотки, подставки, органайзеры

197401 model
Nesneler

Crocs-Style 3D Models: Shoes, Charms and Mods

25814 model
Nesneler

Respirator and Mask STL Models for 3D Printing

3505 model
Nesneler

Hemisphere 3D Models: STL Halves, Globes and Molds

2388 model
Nesneler

Yandex Station Mini 3D Models and STL Stands

207015 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç