Elektronik

3D Models of Cases for Titanate Electronics

This collection gathers STL files for cases and enclosures that surround Titanate-related electronics, such as Meshtastic trackers and power modules. You can use them to organize boards, connectors, and batteries into a single housing. The models vary in assembly style, so check each author's page for dimensions and hardware. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 12414 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 12414 model
Kategori hakkında

«3D Models of Cases for Titanate Electronics»

The collection includes enclosures for Meshtastic tracker boards, housings for charging modules with XT60 connectors, and cases for DIY power banks. Some models are simple two-part shells, while others include cutouts for ports, switches, or antennas. You will also find holders and brackets for small pumps or modules.

Before printing, measure the board or module you plan to house, including connector height and screw hole spacing. Check the author's page for the number of parts, whether supports are needed, and the material and settings they list. Photos of real prints can show how the case closes and where clearances matter.

To narrow results, try synonyms such as enclosure, housing, shell, or cover, and combine them with the device name. Related topics include battery pack cases, tracker mounts, and cable management clips. If you need a different connector layout, search for the connector type or the board name.

FAQ

Sıkça sorulan sorular

What should I measure before printing a case for a Titanate device?
Measure the board dimensions, mounting hole spacing, and the height of connectors or buttons. Also note the thickness of the battery or module that will sit inside.
Do these cases usually need supports?
It depends on the model. Some are designed with overhangs that print without supports, while others include bridges or small features that may need them. The author's page often states the intended orientation.
Can I adapt a Meshtastic case for a different tracker board?
Only if the board dimensions and port positions match closely. You may need to edit the STL or choose a parametric model that lets you adjust cutouts.
How do I find a case for a specific connector like XT60?
Search for the connector name together with terms like enclosure, housing, or case. You can also look for the module name, since many cases are named after the board they hold.
İlgili
Elektronik

3D baskı için elektronik kasası ve muhafaza modelleri

12911 model
Elektronik

3D model LTO lityum titanat pil kutusu STL

114319 model
Nesneler

3D model insan vücudu ve gövde modelleri

626238 model
Yazıcı parçaları

3D yazıcı kasası ve muhafaza modelleri

12663 model
Elektronik

3D Hoparlör Kasası ve Dinamik Kutusu STL Modelleri

128298 model
Elektronik

3D model kamera kasası ve montaj parçaları

187522 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç