Bahçe

3D Models for Hose and Conduit Splitters

This collection gathers STL files for splitters and adapters that divide or redirect flow in hoses, conduits and tubes. You will find Y-shaped garden hose connectors, corrugated conduit branches, pneumatic tees and filament tube splitters. It helps when a single line needs to feed two or more paths, and the model page shows the dimensions and fittings to check. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2783 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2783 model
Kategori hakkında

«3D Models for Hose and Conduit Splitters»

The models cover several connection types. Garden hose splitters usually branch one supply into two outlets, while corrugated conduit splitters handle larger drainage or cable routing lines. Air and pneumatic splitters use push-fit or threaded ports, while filament tube splitters use narrow PTFE lines on a 3D printer. Small-bore versions appear for aquarium or similar flexible tubing.

When choosing a model, check the inner and outer diameters, thread type and number of ports. Look at the number of parts, whether supports are needed, and how the pieces join or seal. The author's page may list material, layer height, wall count and photos of real prints. These details matter more than the shape alone.

To refine the search, try synonyms such as Y adapter, tee connector, hose divider, manifold or branch fitting. Add the tube size or context, for example garden, corrugated conduit, pneumatic, aquarium or filament. Related topics include downpipe diverters, drip irrigation fittings and printer filament guides.

FAQ

Sıkça sorulan sorular

What does a corrugated hose splitter do?
It takes one corrugated line and divides it into two or more branches, or joins several lines into one. The exact flow direction depends on the internal shape and port layout.
How do I match a splitter to my hose or conduit?
Measure the inner and outer diameter, thread pitch and the number of ports you need. Compare those measurements with the dimensions on the model page before printing.
Which material works for a printed splitter?
The choice depends on the fluid, temperature and load on the part. The author's page may list a material and settings that were used for the model.
Can a printed splitter connect different hose sizes?
Some models step from one diameter to another, such as a garden hose thread to a narrow tube. Check the listed inlet and outlet sizes to see whether the transition matches your setup.
İlgili
Alet ve ekipman

3D Models for Corrugated Hose Splitters and Adapters

3827 model
Ev ve yaşam

Corrugated Hose Adapter STL Models

65152 model
Alet ve ekipman

3D Models for Corrugated Conduit Splitters with Clamps

12327 model
Alet ve ekipman

Angled Corrugated Hose Adapters: 3D Models and STL Files

82231 model
Alet ve ekipman

3D Models for Corrugated Conduit Splitters and Clamps

2374 model
Yazıcı parçaları

Tube Splitter STL Models for 3D Printing

1390 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç