Hobi ve kendin yap

Air65 3D Printing Parts: Canopies, Cases, Frames

This collection gathers STL files for Air65-style tiny whoops: canopies, transport cases, frames and small mounts. You can compare how parts are shaped for different camera angles, antennas and battery straps. It is useful when you want to repair or adapt a small FPV drone without starting from a blank design. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 113658 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 113658 model
Kategori hakkında

«Air65 3D Printing Parts: Canopies, Cases, Frames»

Canopies appear often, with shapes for lower camera angles or for holding an antenna. Cases and covers range from simple boxes to designs with room for a charger and batteries. Frames and small mounts are separate parts, and their geometry changes with the whoop size and the hardware they carry.

Before printing, check the model page for size and scale, the number of parts, and whether the author shows how they fit together. Look at the listed material and slicer settings, especially for thin walls and flexible parts. Photos of real prints help you judge how the part sits on the drone and where it may need trimming.

To narrow results, try terms such as tiny whoop, canopy, camera mount, antenna holder, battery strap, and transport case. Related searches include FPV drone accessories, lightweight drone covers, and small frame parts. Combining the drone size with the part type usually gives a shorter list to review.

FAQ

Sıkça sorulan sorular

What kinds of Air65 parts appear in this collection?
The main groups are canopies, transport cases, frames, and small mounts such as antenna holders and battery straps. Each group covers a different repair or build need.
How do I choose a canopy for a lower camera angle?
Compare the camera angle and mounting points shown on the model page with your own setup. Check whether the canopy is meant to hold an antenna or a camera board, and review photos of printed parts.
What should I check before printing a case or frame?
Look at the overall dimensions, wall thickness, and the number of parts. Also read the author's notes on material and slicer settings, and see whether the design needs supports.
Can I use a part made for a different whoop size?
Check the mounting pattern and scale before printing. A part from another size may need scaling or trimming to align with your drone.
İlgili
Hobi ve kendin yap

CYMA Airsoft and Gel Blaster 3D Models

1607 model
Hobi ve kendin yap

3D Models of IZH Stocks and Stock Parts

1840 model
Hobi ve kendin yap

3D Models for Yarn: Bowls, Spinners and Hooks

3539 model
Hobi ve kendin yap

Spinning 3D Models: Tops, Bobbins and Fidget STL

9597 model
Hobi ve kendin yap

3D Models for Fishing Rod Storage and Holders

23961 model
Hobi ve kendin yap

Carp Fishing 3D Models for Tackle and Bait Tools

17418 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç