Spor ve fitness

Airoh GoPro Mounts: 3D Printed Helmet STL Files

This collection gathers STL files for attaching action cameras to Airoh helmets, mostly chin mounts, small adapters and handlebar brackets. It is useful if you want a camera position that a standard adhesive mount does not give you, and you plan to print the part yourself on a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2003 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2003 model
Kategori hakkında

«Airoh GoPro Mounts: 3D Printed Helmet STL Files»

The models fall into a few groups. Chin mounts are shaped to sit against the chin bar of a helmet and hold the camera low and central. Other files are made for a particular helmet line, where the chin bar curve and vent layout differ, and some are handlebar or rail brackets that move the camera off the helmet entirely. There are also small angle adapters, slim variants and multi-camera rigs for shooting from several directions at once.

Before printing, read the model page for the helmet model and size it was drawn around, since chin bar shapes vary between Airoh lines. Check how many parts are involved and how they join, whether the geometry needs supports, and which material and settings the author lists. For parts that carry a camera at speed, layer orientation and material choice matter more than print speed, and photos of real prints show how the piece sits on the helmet.

If the first search gives few results, try other wording: action camera mount, chin mount, helmet bracket, or the camera name plus helmet. Related searches include enduro and motocross helmets, handlebar clamps, rail and picatinny brackets, and flexible TPU mounts. Adding the helmet line or the camera model narrows the list further.

FAQ

Sıkça sorulan sorular

Will a chin mount drawn for one Airoh helmet work on another?
Not necessarily. Chin bar curvature, width and vent placement differ between helmet lines, so check the helmet model and dimensions listed on the model page before printing.
Which material is used for helmet camera mounts?
Authors usually list a material and settings on the model page. Stiff filaments are common for brackets, while flexible ones appear where the part clamps or absorbs vibration; follow what the author states for that specific file.
Do these mounts need support material?
It depends on the geometry. Flat-backed chin mounts often print without supports, while angled or hollowed parts may need them. The model page and photos of real prints usually show the intended orientation.
How do I find mounts for cameras other than GoPro?
Search by the camera name together with helmet mount, chin mount or action camera bracket. The same bracket shapes are often redrawn for other compact cameras and 360 rigs.
İlgili
Pratik gereçler

Airoh Strycker GoPro Mounts: 3D Models and STL Files

1354 model
Spor ve fitness

Airoh Helmet Accessories: 3D Models and STL Files

105 model
Pratik gereçler

GoPro 3D Models: Mounts, Cases and Adapters

22148 model
Pratik gereçler

GoPro 9 Cases and Mounts: 3D Models to Print

3810 model
Spor ve fitness

Airoh Helmet 3D Models: Mounts, Clips and STL Parts

22237 model
Pratik gereçler

GoPro Holder 3D Models and STL Mounts to Print

433823 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç