Hobi ve kendin yap

AKS-74U Handguard 3D Models and STL Files

This collection gathers 3D models of AKS-74U handguards, from vented upper covers to railed and thumbhole variants. It is meant for anyone doing 3D printing work on an airsoft replica or a display piece. Each listing links to the author's page, where the STL files and notes are published. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 10.10.2026

Koleksiyonu gör Tümünü göster: 1767 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1767 model
Kategori hakkında

«AKS-74U Handguard 3D Models and STL Files»

The models fall into a few groups. Vented upper handguards reproduce the slotted look of the original, while railed versions add Picatinny sections on the upper, the lower part or the dust cover. Thumbhole and other ergonomic shapes change how the front end is held, and separate lower handguards and gas tube covers cover the remaining parts. Some entries are display or low-poly models rather than parts meant to be mounted.

Before printing, read the author's page. Check the stated dimensions and scale, the number of separate parts and how they join, and whether the model needs supports. Look at the material and print settings the author lists, and at photos of real prints if they are provided. Measure your own replica and compare it with the dimensions given, since the mounting points differ between airsoft bodies.

Search results can be widened with a few related terms. Try both spellings, AKS-74U and AKS74U, and add words such as upper, lower, vented, cheese grater, Picatinny, dust cover or gas tube. Related topics include airsoft AK handguards in general, rail adapters, and full replica models for display.

FAQ

Sıkça sorulan sorular

What is the difference between an upper and a lower handguard model?
The upper piece sits above the barrel and often carries the vented pattern, while the lower piece is the part held by the front hand. Many listings cover only one of the two, so check which one the files contain.
Do these handguard models need supports?
It depends on the shape and on how the model is oriented on the plate. Authors usually state whether supports are needed and where they place them; that note is worth reading before slicing.
Which material should I use for an airsoft replica part?
There is no single answer, since the choice depends on how the part is loaded and on your printer. Look at the material and settings listed on the model page and at photos of prints made by others.
Can I scale a handguard model to another replica?
Scaling changes wall thickness and mounting points along with the outer size. Compare the stated dimensions with measurements from your own replica before deciding to resize anything.
İlgili
Askeri

AK-74 Handguard STL Models for 3D Printing

3661 model
Hobi ve kendin yap

AK Handguard STL Files for 3D Printing

2869 model
Askeri

AK Handguard STL Models for E&L Airsoft Replicas

1827 model
Hobi ve kendin yap

AK-74 Sleeve and Airsoft Parts: 3D Models to Browse

11086 model
Askeri

Kruger Handguard 3D Models and STL Files to Print

588 model
Askeri

AK74 Handguard STL Models for 3D Printing

3553 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç