Pratik gereçler

Baofeng Accessories: 3D Models and STL Files

This collection gathers 3D models that hold, protect or carry Baofeng handheld radios and their parts. It covers car mounts, cases, clips and battery-related pieces, so you can find an STL that matches how you actually use the radio. Most of these designs are small and print on a typical 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 378541 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 378541 model
Kategori hakkında

«Baofeng Accessories: 3D Models and STL Files»

The models split mainly by where the radio ends up. Car mounts use a sun visor, cup holder or dash surface and often include a tray or bracket that stays in place while you drive. Cases, frames and button guards wrap the body to protect the controls, while belt clips and carabiners move the radio onto clothing or a strap. Battery holders and adapters deal with power rather than position, and simple stands keep the radio upright on a desk.

When choosing a model, read the author's page before printing. Check which radio body the design was drawn around, since the same shape can differ between versions. Look at the number of parts and how they join, whether supports are needed, and which material and settings the author lists. Photos of real prints show how the mount sits and how much clearance it leaves around buttons, knobs and the antenna.

If the results feel narrow, try other words for the same object: holder, bracket, cradle, dock, tray, holster or clip. Related searches such as radio pouch, antenna protector, charging dock or speaker mic holder often lead to designs the main term misses. Adding the surface or place, like visor, cup holder, bike or backpack, narrows the list further.

FAQ

Sıkça sorulan sorular

Which measurements matter for a radio mount?
The body width and thickness, the position of the belt clip, and the space around the antenna and knobs. Compare those with the dimensions the author lists before printing.
Do these models need supports?
It depends on the shape. Brackets with overhangs and hollow cradles often do, while flat plates and simple guards may not. The author's page usually states what was used.
Which material works for a car mount?
A material that keeps its shape in a hot interior is the usual choice, since a closed car gets warm. The author's notes often name the filament and settings used for the print shown.
Can I scale a model to another radio?
Scaling changes wall thickness and the fit of buttons and clips, so it rarely works cleanly. It is safer to search for a design drawn for that specific body.
İlgili
Ev ve yaşam

3D Models for Accessory Stands and Desk Holders

15635 model
Taşıtlar

3D Models for Car Accessories: STL Files to Print

528086 model
Oyuncaklar ve figürler

Doll Accessories 3D Models: STL Files for Miniatures

5169 model
Taşıtlar

Boat Accessories: STL Models for 3D Printing

409482 model
Ev ve yaşam

Garage Accessories: STL Models for 3D Printing

404682 model
Oyuncaklar ve figürler

Pig 3D Models: Toys, Keychains and STL Accessories

11491 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç