Müzik

3D Models for Arturia MiniFuse 2 Mounts and Stands

This collection gathers STL files made around the Arturia MiniFuse 2 audio interface: desk mounts, brackets, stands, hangers and housing mods. It helps when you want the interface off the desktop or held at a fixed angle and would rather print a part than buy a new accessory. Listings come from different sources, so the files and notes vary. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 1326 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1326 model
Kategori hakkında

«3D Models for Arturia MiniFuse 2 Mounts and Stands»

The models fall into a few practical groups. Under-desk and desk mounts hold the interface below or beside a work surface, while stands and risers lift it to a readable angle. Hangers attach the unit to a monitor or wall, and housing or case mods replace or extend the outer shell. Shelf and rack brackets are aimed at people arranging several pieces of studio gear in one place.

Before printing, check the dimensions the author gives against your own unit, including the depth of the rear panel and the space needed for cables and knobs. Look at how the part is meant to sit on the build plate, whether overhangs need supports, and which material and settings the author lists. Photos of real prints show more than a render, especially around screw holes, clips and thin arms.

If the first search is thin, try other wording: audio interface holder, USB interface bracket, under-desk mount, desk clamp, riser, hanger or rack bracket. Related searches for MIDI keyboards, controllers and small studio gear often return parts that can be adapted. Combining a device name with a mounting word usually narrows results faster than the device name alone.

FAQ

Sıkça sorulan sorular

What should I measure before printing a mount for an audio interface?
Measure the width, depth and height of the unit, then note where the ports, knobs and any screw points sit. Cable clearance at the back is easy to overlook.
Do these brackets need supports?
It depends on the shape. Flat plates and simple L-brackets often print without them, while arms and hooks with overhangs may need supports. The author's page usually states this.
Which material works for a desk bracket?
PLA is common for light indoor parts, and PETG is often chosen where a little flex or warmth resistance helps. Check the material and settings the author lists for that model.
How can I find more models like these?
Search by function rather than product name: under-desk mount, desk bracket, riser, hanger, audio interface holder. Adding the gear type, such as MIDI keyboard or controller, widens the results.
İlgili
Elektronik

3D Models for Desk Mounts of Audio Gear

701172 model
Müzik

3D Models for Drum Heads, Mounts and Jigs

1578 model
Müzik

Didgeridoo 3D Models: Full-Size, Mini and Modular STL

90 model
Müzik

Ocarina 3D Models: Playable STL Designs

1834 model
Müzik

3D Models for Vinyl Wall Mounts and Record Displays

12388 model
Müzik

Pioneer Volume Knob STL Models for 3D Printing

74994 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç