Taşıtlar

Audi MIB and Car Audio 3D Models

This collection gathers 3D models tied to Audi infotainment retrofits, dash trim and microphone mounting, plus a few small printed accessories. Most entries are parts meant to come off a 3D printer and go into a car interior or a desk setup. It helps when a stock bracket is missing or an opening needs a custom surround. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2676 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2676 model
Kategori hakkında

«Audi MIB and Car Audio 3D Models»

The results fall into two families. One covers car audio: adapter plates and trim around double-DIN head units, surrounds for USB and CarPlay ports, and console inserts such as cup holders and coin trays. The other covers studio gear: shock mounts, clips and arm adapters for condenser microphones. Audi keychains form a smaller group of simple one-piece prints.

On the author's model page, check the stated dimensions and scale first, then the number of separate parts and how they join. Look at whether the author lists supports, layer height, material and infill, and study the photos of real prints for how clips and screw holes sit. Thin brackets and threaded adapters behave differently in PLA and PETG, so match the material to the load the part carries.

Search terms can be narrowed by system name or by the part itself: head unit, double-DIN, MIB2, port surround, cup holder, shock mount, mic clip, thread adapter. Adding the chassis code or the microphone capsule diameter usually removes unrelated results. Related topics worth trying include center console trim, speaker adapters and desk microphone arms.

FAQ

Sıkça sorulan sorular

What does MIB refer to in these models?
MIB is Audi's modular infotainment platform, and models under this term usually cover trim, adapter plates and port surrounds used when a head unit is swapped or upgraded. Read the author's notes to see which generation and body the part was drawn for.
Do these microphone mounts need supports?
It depends on the shape. Shock mount cages, thin clips and long arm adapters often have overhangs, while flat plates may print without them. The author's page usually states the orientation and whether supports are listed.
How do I pick a mount for a specific microphone?
Start from the capsule diameter and the thread size, then compare those numbers with the dimensions on the model page. A clip drawn for one body width may not grip another, even when the thread matches.
Can a dash frame be scaled to fit another opening?
Scaling changes wall thickness, clip fit and screw spacing at the same time, so measure the opening and the head unit before adjusting anything. If the difference is large, a model drawn for that chassis is a safer starting point.
İlgili
Taşıtlar

Audi Phone Holders and Car Interior 3D Models

4559 model
Taşıtlar

Audi 3D Models: STL Files for Cars and Keychains

23767 model
Pratik gereçler

3D Models for Phone Stands, Mounts and Cases

3383 model
Pratik gereçler

3D Models for Phone Holders and Stands

12348 model
Taşıtlar

3D Models of Funnels for Audi Cars and Engines

2639 model
Taşıtlar

Audi Wheel 3D Models and STL Files

44132 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç