Elektronik

3D Models for Audio: Speakers, Stands, Mounts

This collection gathers 3D printing files around audio gear: speaker boxes and grilles, headphone stands, phone speaker mounts, cable clips and rack parts. It is useful when you want to organize a desk, replace a broken plastic piece or build a housing around a driver you already own. Most items are small enough for a standard 3D printer, though larger enclosures may need splitting. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 17923 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 17923 model
Kategori hakkında

«3D Models for Audio: Speakers, Stands, Mounts»

The models fall into a few groups. Enclosures and grilles are built around a driver or a speaker opening, so their dimensions matter more than their shape. Stands and holders are mostly about proportions: a headband rest, a tray for a remote or a mount that lifts a phone so its speaker points at you. Cable-side parts are the smallest and simplest, while rack rails and panel blanks are long, flat pieces that follow standard widths.

When you open a model page, read the listed dimensions first and compare them with the driver, phone or headband you have. Check how many parts the design uses and whether they are joined with screws, glue or a snap fit. Look at whether the author mentions supports, infill and wall count, since thin grilles and long rails behave differently. Photos of real prints show how the surfaces and openings came out.

To widen the search, try the terms people use for the same object: speaker box, enclosure, cabinet, grille, bezel, baffle. For desk items, combine audio with stand, holder, mount or organizer. Related directions include turntable accessories, recorder and instrument parts, amplifier cases, and adapters such as jack extenders or splitters.

FAQ

Sıkça sorulan sorular

What should I measure before printing a speaker enclosure?
The driver's outer diameter, the cutout diameter, the mounting hole spacing and the depth behind the baffle. Compare these with the dimensions on the model page rather than with the photos.
Do headphone stands need special filament?
Not necessarily. What matters more is wall thickness and infill at the joint where the weight hangs, since a thin upright can bend over time. The author's page usually lists the settings used.
How do I find a mount for a specific phone or speaker?
Search by the device size or the connector type rather than the brand, and check whether the model is parametric or offered in several size variants.
Can large audio parts be printed on a small bed?
Often yes, if the design is split into sections. Look for a version with separate panels or a note about how the parts are joined, then plan the seams before slicing.
İlgili
Taşıtlar

Audi Grille 3D Models and STL Files for 3D Printing

11154 model
Nesneler

Audi Molding and Trim 3D Models: STL Parts

2215 model
Taşıtlar

Audi Emblem 3D Models: STL Badges and Keychains

79008 model
Taşıtlar

Audi 100 Cup Holder 3D Models and STL Files

3335 model
Pratik gereçler

Audi A8 and A-series keychain 3D printing STL models

199279 model
Taşıtlar

Audi 2 DIN Radio Frames: 3D Models and STL Files

11217 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç