Pratik gereçler

Bumper and Case STL Files for iPhone 14 Pro Max

This collection gathers 3D models built around the iPhone 14 Pro Max: edge-only bumpers, full covers, flexible shells and a few docks and cradles. Most of them are small parts, so they are a reasonable first project if you are new to 3D printing. The variety is wide enough to compare several approaches to the same phone before you commit to a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 2855 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2855 model
Kategori hakkında

«Bumper and Case STL Files for iPhone 14 Pro Max»

The models split mainly by how much of the phone they cover. Bumpers wrap the frame and leave the back open, full covers enclose the body, and slim shells sit close to the surface with little added thickness. Docks and cradles belong to a different group: they hold the phone upright rather than protect it, and often combine a printed body with a separate insert.

When choosing a model, open the author's page and read the listed dimensions and wall thickness first, since a case that is a fraction too tight will not slide on. Check how many parts are involved and whether they are meant to be glued or snapped together, whether the model needs supports, and which material and settings the author used. Photos of actual prints are more informative than renders, especially around the camera opening and the button cutouts.

Flexible filaments such as TPU are common for cases because they bend over the corners, while rigid materials suit bumpers and docks. If a search returns too little, try related wording: phone cover, shell, frame, protective case, or the model name with the word bumper or dock. Broadening to neighbouring sizes or the Pro version of the same phone also brings up designs that can be scaled or adjusted.

FAQ

Sıkça sorulan sorular

Which material works for a printed phone case?
Flexible filaments are usually chosen for cases that must bend over the corners, while rigid filaments are more common for bumpers and docks. The author's page often states which material the model was designed around.
Do these models need supports?
It depends on the shape. Flat-backed covers often print without them, while bumpers with overhangs and docks with recesses may need them. Check the print notes on the model page before slicing.
How do I know the case will fit my phone?
Compare the dimensions given by the author with your phone's measurements, and look at photos of printed results. Small differences in wall thickness matter more than the overall outline.
Can I adapt a model made for another iPhone size?
Scaling changes camera openings and button positions, so it rarely works cleanly. It is usually easier to search for a design made for your exact model.
İlgili
Pratik gereçler

iPhone 14 3D Models: Cases, Stands and Holders

42447 model
Pratik gereçler

iPhone 14 Case STL Models: Shells, Docks, TPU

6776 model
Pratik gereçler

iPhone 14 Pro Case 3D Models and STL Files

11324 model
Pratik gereçler

iPhone 3D Models: Stands, Cases and STL Files

50668 model
Pratik gereçler

3D Models for Max Station Setups and Holders

2756 model
Pratik gereçler

iPhone Stand 3D Models: Desk and MagSafe Designs

540077 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç