Mutfak

Coffee Jar 3D Models: Lids, Adapters and Holders

This collection gathers 3D printing models built around coffee jars: replacement lids, levelers, adapters and holders. Some files are made for one jar size, while others are left open so the diameter can be adjusted. It helps when a jar has lost its lid or when the jar is meant to do a second job in the kitchen. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 10 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 45829 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 45829 model
Kategori hakkında

«Coffee Jar 3D Models: Lids, Adapters and Holders»

Lids and storage parts form the largest group: flat lids, textured lids, and lids with a spoon or a coffee leveler attached. A second group covers adapters and connectors that join a jar to a grinder, a cold brew setup or a mason jar thread. There are also holders, racks and stacking tools, plus a smaller set of files that turn an empty jar into a sprouter, a trap or a lid for a small tank.

Before printing, compare the opening diameter and thread pitch the author lists with your own jar, because instant coffee jars differ between brands and sizes. Look at the number of parts, whether the model needs supports, and which material and layer height the author used. Photos of real prints on the model page show how the thread and the lid edge come out on a home 3D printer.

If a result does not match, try synonyms: storage jar, container lid, screw cap, jar thread, mason jar adapter. Related searches such as spice jar, ground coffee, cold brew or jar rack often lead to files with similar geometry. Adding the jar volume in millilitres or the word customizable narrows the list further.

FAQ

Sıkça sorulan sorular

How do I check whether a lid matches my coffee jar?
Compare the diameter and thread the author lists with your own jar. Measuring the opening with calipers is more dependable than reading the volume printed on the label.
Do these models need supports?
It depends on the file. Flat lids usually print without them, while threaded parts and overhangs may need them, and the author's page normally states which case applies.
Can a jar model be scaled up or down?
Scaling changes the thread, so a resized lid may no longer grip. Adjust the size only if the author notes that the thread tolerates scaling.
Which material do authors list for jar lids?
PLA and PETG appear often, with PETG chosen for parts that flex or see moisture. Check the material and settings the author lists before starting a print.
İlgili
Mutfak

Coffee 3D Models and STL Files for Printing

104072 model
Mutfak

3D Models of Jars and Lidded Containers for 3D Printing

100176 model
Mutfak

Coffee Organizer 3D Models and STL Files

222688 model
Mutfak

Jar Lid 3D Models: Mason Jar Lids and Holders

69422 model
Mutfak

Coffee Machine 3D Models and STL Files

254102 model
Mutfak

Coffee Container STL Models for Beans and Filters

97488 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç