Elektronik

3D Models for FPV Battery Holders and Mounts

This collection gathers STL files for holding, mounting and storing the batteries used with FPV quads and their goggles. You will find trays that bolt to a frame, packs that clip to a headset strap, and racks that keep spare cells in order. It is a practical starting point when a build needs a pack to stay put. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 565121 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 565121 model
Kategori hakkında

«3D Models for FPV Battery Holders and Mounts»

The models fall into a few groups. Trays that sit on the quad are usually shaped around one pack size, while holders for goggles carry a larger pack on the headset strap or on a belt. Storage racks take several packs at once, and wall mounts keep a drone or its packs off the bench. Materials differ as well: flexible filament is common where grip matters, rigid filament where the part carries load.

Before printing, compare the dimensions the author lists with your own pack, and check how the part attaches — screw holes, strap slots or a clamp. Look at whether supports are required and in which orientation the model is meant to be printed, since overhangs and thin walls change the result. The material and settings on the model page, together with photos of real prints, tell you more than the title does.

If the first search gives little, try other words for the same object: battery tray, pack mount, goggle battery case, holder shaped for a particular cell. Related searches such as frame plates, antenna mounts, camera mounts and wall storage often lead to parts from the same designers. Adding the pack format or the frame type to the query narrows the list further.

FAQ

Sıkça sorulan sorular

How do I pick a holder for the pack I already own?
Measure the pack and compare those numbers with the dimensions on the model page. Also check how the part attaches, since a tray drilled for one hole pattern will not match every frame.
Do these parts need supports when printed?
It depends on the geometry. Authors often state the intended orientation and whether supports are needed, so read that note before slicing.
Which filament is used for holders?
Flexible filament appears where the pack should be gripped or cushioned, and rigid filament where the holder is screwed to a frame. The author's notes usually say what was used.
Can a holder be used for storage rather than flying?
Yes. Multi-slot racks and wall mounts are made for keeping packs and drones organised between sessions, and they follow the same dimension checks as flight parts.
İlgili
Elektronik

7-Inch FPV Drone STL Models and Printable Parts

13098 model
Taşıtlar

FPV Drone 3D Models: Frames, Propellers and Parts

345867 model
Nesneler

3-Inch FPV Drone STL Models and Printed Frames

13693 model
Elektronik

FPV Drone Frames: 3D Models and STL Files

12383 model
Elektronik

9-Inch FPV Drone Frames: 3D Models and STL Files

5058 model
Elektronik

FPV Drone 3D Models: Frames, Quads and Accessories

13041 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç