Mutfak

Salt Saucer and Shaker 3D Models to Print

This collection gathers STL files for salt saucers and the pieces that usually sit beside them: shakers, scoops, funnels and small trays. It helps when you want a dish that matches a grinder you already own, or a scoop sized to a particular jar. Most of these parts are small, so they print quickly on a home 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 44 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 10711 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 10711 model
Kategori hakkında

«Salt Saucer and Shaker 3D Models to Print»

The models fall into a few groups. Shakers and grinders cover single and paired versions, sometimes with a wider opening for outdoor use. Cellars and lidded dishes are the saucer itself, often with a lid or a matching base. Scoops, spoons and funnels handle dispensing from a bag or jar, and trays or caddies hold several containers together on the table.

When choosing, look at the dimensions the author lists and compare them with your grinder base or jar mouth, since a saucer that is a few millimetres off will not sit flat. Check how many parts a model has and whether they are meant to be glued or snapped. Read the notes on supports, layer height and material, and look at photos of real prints to judge wall thickness and how the surface handles salt, which is abrasive and absorbs moisture.

To widen the results, try synonyms: cellar, dish, caddy, cruet, condiment, spice, scoop, funnel, organizer. Related searches such as pepper grinder base, spice jar lid or table condiment tray often return models that fit the same need. If you need a specific fit, searching by the appliance or container name usually narrows the list faster than a generic term.

FAQ

Sıkça sorulan sorular

What is the difference between a salt saucer and a salt cellar?
A saucer is usually a shallow open dish, while a cellar is a deeper container that often comes with a lid. Both hold salt for the table, and many models combine the two shapes.
Which material works for a salt dish?
PLA is common for dry salt because it is easy to print and clean, while PETG resists moisture better in a humid kitchen. Check what the author lists and whether the model is meant for food contact in your own use.
Do these models need supports?
Shallow dishes and scoops often print without them, while lids, handles and overhanging rims may need support. The model page usually states the orientation the author used.
How do I find a saucer that fits my grinder?
Measure the base diameter and height of your grinder, then compare those numbers with the dimensions given on the model page. Searching by the grinder name or by the word base often returns closer matches.
İlgili
Bahçe

3D Models of Saucers: Plant, Tea, Sci-Fi

6298 model
Bilim ve eğitim

3D Models for Salt and Pepper Shakers and Spice Jars

13088 model
Mutfak

Cup and Saucer 3D Models: STL Files for Tea and Coffee

12458 model
Mutfak

Salt Dispenser 3D Models and STL Files

15597 model
Mutfak

Salt and Pepper 3D Models: STL Shakers and Trays

11858 model
Mutfak

Salt and Pepper Shaker STL Models for 3D Printing

12808 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç