Taşıtlar

3D Models for Number Plate Bolts and Mounts

The collection gathers STL files for number plate bolts, mounts, frames and holders. It covers parts for cars and motorcycles, from simple spacers to full mounting assemblies. Use it to compare how different designs attach and what hardware they expect. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 44 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 173289 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 173289 model
Kategori hakkında

«3D Models for Number Plate Bolts and Mounts»

Common entries include front and rear plate mounts, frame-less holders, bolt covers, and small clips or brackets. Some are single-piece mounts, while others are construction kits with separate spacers or bolt heads. Motorcycle-specific versions often differ in hole spacing and angle from car parts.

Before printing, check the model page for the plate size, bolt diameter and spacing, and the number of parts. Look at whether the author lists supports, material, layer height, and infill, and review photos of real prints. For parts that take load or vibration, consider thicker walls and a material that matches the intended use.

To narrow results, try synonyms such as plate bracket, tag mount, number plate holder, and bolt cap. Related searches include frame-less holder, quick-release mount, motorcycle tag bracket, and parametric keychain. Adding a vehicle type or mounting position to the query can separate front, rear, and side-mounted designs.

FAQ

Sıkça sorulan sorular

What measurements matter for a number plate bolt model?
Check the plate hole spacing, bolt diameter, thread type, and the angle of the mounting surface. These determine whether the printed part lines up with the existing holes.
Do printed number plate mounts need supports?
It depends on the overhangs and the orientation chosen by the author. The model page often notes whether supports are needed and where they should go.
How can I find motorcycle-specific number plate parts?
Search for motorcycle tag bracket, bike plate mount, or bolt cover. Compare the listed hole spacing and angle with your bike's plate area.
What materials work for number plate bolts and holders?
Authors may list PLA, PETG, ASA, or other filaments with their settings. For outdoor use, review the material notes and consider UV and temperature exposure.
İlgili
Taşıtlar

3D Plaka Modelleri ve STL Dosyaları

144689 model
Taşıtlar

Plaka bağlantı parçaları için 3D model ve STL dosyaları

120844 model
Ev ve yaşam

3D Models of Signs for Home, Office and Car

26440 model
Alet ve ekipman

3D Models of Bolts, Screws, and Hardware

10623 model
Nesneler

Pin and Bolt 3D Models: STL Files to Browse

641268 model
Taşıtlar

3D Models for Number Plate Frame Mounts and Brackets

11634 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç