Takı ve mücevher

Heart Keychain 3D Models to Print

This collection gathers heart-shaped keychain models shared across 3D-printing platforms: plain charms, paired couple designs, fidget versions and multi-colour prints. Most are small enough to print in one run on a desktop 3D printer. Use the list to compare shapes, sizes and assembly before you download an STL. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 5344 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5344 model
Kategori hakkında

«Heart Keychain 3D Models to Print»

The simplest entries are flat or slightly rounded hearts with a hole for a ring, usually printed as a single piece. Others add a mechanism: a clicky hinge, a rotating gear, or a puzzle half that pairs with a second keychain. Multi-colour versions either switch filament at a set layer or split the shape into parts that slot together, and some are modelled with a knitted or stitched texture instead of smooth plastic.

On the author's page, check the overall size and the diameter of the ring hole, since a small opening may need drilling or a thinner ring. Look at the part count and whether the pieces are meant to be glued or snapped, then read the material and settings the author lists. Photos of real prints show how edges, layer lines and colour transitions actually come out.

If the results feel narrow, try related wording such as charm, pendant, keyring, bag tag or zipper pull, and add terms like couple, Valentine, fidget or pixel. Searching by shape also helps: rounded, geometric, anatomical, puzzle. Combining a shape word with a use word usually brings up designs that the plain word heart misses.

FAQ

Sıkça sorulan sorular

What size are heart keychain models usually printed at?
Sizes vary a lot, so read the dimensions on the author's page rather than assuming. You can scale the model in your slicer, but the ring hole and wall thickness scale with it, so check those again after resizing.
Do heart keychains need supports?
Flat designs are often oriented to print lying down, which keeps overhangs short. Curved or hanging shapes may need supports, and the author's notes usually state the orientation and whether supports are expected.
Can a two-colour heart keychain be printed without a multi-material printer?
Yes. Common approaches are a filament change at a chosen layer, or a model split into separate parts that are printed individually and then joined. Both are described on the author's page.
Which filament is used for a keychain that gets handled often?
PLA is common for decorative charms, while some makers prefer PETG or a flexible filament where a part bends. Check what the author lists and how the model is loaded, since a thin ring hole is the part that takes the most stress.
İlgili
Nesneler

Star-Shaped Keychain 3D Models and STL Files

4761 model
Sanat ve dekorasyon

Heart 3D Models: STL Files for Valentine Printing

101157 model
Nesneler

Keychain 3D Models and STL Files for 3D Printing

108067 model
Takı ve mücevher

Heart Bead 3D Models for Printing and Jewelry

50511 model
Ev ve yaşam

Heart-Shaped 3D Models for Desk and Drawer Storage

3164 model
Ev ve yaşam

Heart Organizer 3D Models and STL Files

12644 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç