Nesneler

3D Models of Caps: Bottle, Cartridge, Lens and Screw

This collection gathers 3D models of caps for bottles, cartridges, lenses, and screw heads. You can find STL files for replacing lost closures, protecting a lens, or covering a bolt. It helps when a small part is missing and a custom fit is easier than buying a whole new item. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 10.10.2026

Koleksiyonu gör Tümünü göster: 190361 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 190361 model
Kategori hakkında

«3D Models of Caps: Bottle, Cartridge, Lens and Screw»

Caps in this collection range from simple bottle closures to threaded cartridge covers and lens protectors. Some are designed as a single piece, while others include a hinge, a clip, or a keychain loop. Screw head caps are usually small and flat, whereas container caps may need a precise thread profile to match a specific neck.

Before printing, check the inner diameter and thread pitch on the author's page, because a cap that fits one bottle may not fit another. Look at the number of parts and whether the model needs supports, especially for overhangs inside a thread. The material and settings the author lists matter: a flexible filament can help a snap-fit cap, while a rigid one suits a screw-on cover.

To narrow results, try synonyms like lid, cover, stopper, or closure instead of cap. Related searches include bottle thread, cartridge nozzle, lens protector, and screw head cover. You can also combine a material or a printer type with the word cap to see models that match your setup.

FAQ

Sıkça sorulan sorular

How do I find a cap that fits my bottle?
Measure the outer diameter of the bottle neck and the thread pitch, then compare those numbers with the dimensions listed on the model page. Many authors include a note about which bottle or container the cap was designed for.
What material works for a threaded cap?
The author's page often suggests a material, such as PLA, PETG, or a flexible filament. Threaded caps usually need a material that holds its shape and does not shrink too much.
Do these caps need supports?
It depends on the model. Caps with internal threads or deep recesses may need supports, while flat or open designs often print without them. Check the author's photos and notes for guidance.
Can I scale a cap model to fit a different container?
Scaling changes the thread pitch as well as the diameter, so a scaled cap may not screw on correctly. It is better to look for a model that already matches your container's dimensions.
İlgili
Nesneler

Bottle Cap 3D Models: STL Caps, Lids and Props

5611 model
Taşıtlar

3D Models of Caps and Covers for Vesta Cars

3309 model
Mutfak

Saeco Coffee Machine Caps and Lids: 3D Models

54678 model
Taşıtlar

Towbar Cap 3D Models: STL Files for 50 mm Hitches

55568 model
Taşıtlar

Gas Cap 3D Models: Holders, Tethers and Can Caps

58997 model
Taşıtlar

Valve Cap 3D Models for Schrader and Presta

69206 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç