Alet ve ekipman

3D Models for Screwdriver Battery Holders

This collection gathers 3D models that store and mount cordless screwdriver batteries: wall brackets, stackable organizers and modular grid inserts. It is useful when a loose pack on a shelf or bench needs a fixed place. Every listing is an STL or similar file meant for a 3D printer, so the fit depends on the dimensions the author gives. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 12347 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 12347 model
Kategori hakkında

«3D Models for Screwdriver Battery Holders»

The models fall into a few groups. Wall brackets hold one pack at a fixed angle, stackable trays keep several cells or packs in a row, and modular inserts drop into a pegboard or grid system. Some files cover the battery only, while others combine a battery slot with a drill or bit holder on the same plate.

Before printing, open the model page and read the dimensions: the slot width, depth and the thickness of the mounting plate. Check how many separate parts the file contains and whether the author shows the pack sliding in or clicking into place. Look at the material and layer settings the author lists, and at photos of actual prints, since a bracket printed in a brittle filament behaves differently from one in a tougher one.

To widen the results, try other wordings for the same object: battery mount, battery bracket, battery tray, pack holder, or the tool type instead of the battery. Related searches such as drill holder, bit organizer, pegboard bin or grid storage often return plates that can be combined with a battery slot. Adding the voltage class or the cell format you use narrows the list further.

FAQ

Sıkça sorulan sorular

How do I check that a holder fits my battery pack?
Compare the slot dimensions on the model page with the measurements of your pack, including the base and any release button. A few millimetres of difference is usually enough to make the pack sit loose or not enter at all.
Which material works for a wall-mounted battery holder?
It depends on the load and where the holder is fixed. Many authors list the material they used and the wall thickness of the part; a thicker wall and a tougher filament help where the bracket carries weight.
Do these holders need supports?
Some do, especially those with overhangs or a closed slot, and the author usually states it. Others are designed with flat faces and print without them, which is worth checking before you slice the file.
Can I combine several holders into one storage setup?
Yes, many files are made to sit next to each other or to clip into a rail or grid. Check the mounting pattern and spacing so the parts line up when you place them side by side.
İlgili
Alet ve ekipman

3D model vidalama makinesi ve tornavida STL dosyaları

37099 model
Alet ve ekipman

Şarjlı vidalama makinesi için 3D model tutucu

224028 model
Alet ve ekipman

Metabo şarjlı tornavida için 3D model ve STL dosyaları

2670 model
Elektronik

3D Baskı Pil Tutucu ve Pil Kutusu Modelleri

121423 model
Alet ve ekipman

Metabo akülü vidalama için 3D model ve STL dosyaları

4931 model
Alet ve ekipman

Dnipro-M batarya tutucu ve adaptör 3D modelleri

102556 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç