Ev ve yaşam

Remote Control Holder 3D Models and STL Files

This collection gathers 3D models for keeping remote controls in one place: desk caddies, wall mounts, minimal stands and holders shaped around a particular device. Most of them are small parts that fit a standard 3D printer build plate, so a single spool is usually enough. It helps when you want a defined spot for remotes instead of leaving them on a table or shelf. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 583800 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 583800 model
Kategori hakkında

«Remote Control Holder 3D Models and STL Files»

The models differ mainly in where they sit and how many remotes they take. Desk caddies and organizers group several controls in one tray, wall-mounted versions attach beside a screen, a switch or a bed, and minimal stands hold one or two remotes upright. Some designs add RGB LED lighting or a decorative silhouette, while others are shaped around a specific remote, such as one for an air conditioner or a lamp.

Before printing, open the author's model page and read the listed dimensions, since remote controls vary in width and thickness. Check how many parts the holder has and whether they are joined with glue, screws or a snap fit, and whether the author recommends supports for overhangs. The material and layer height the author lists are a useful starting point, and photos of real prints show how the holder looks once assembled and loaded.

If the results feel narrow, try other wordings: remote caddy, remote stand, remote mount, TV remote organizer, or wall bracket for a controller. Related searches such as desk organizer, cable clip, light switch surround or shelf bracket often return models that solve the same storage problem. Adding a room or device to the query, for example bedroom or air conditioner, narrows the list further.

FAQ

Sıkça sorulan sorular

What size should a remote holder be?
It depends on your remotes. Measure the width, thickness and length of the largest one, then compare those figures with the dimensions the author lists on the model page.
Do these holders need supports?
It varies by design. Flat-backed wall mounts and simple trays often print without them, while models with deep recesses or overhanging lips may need them. The author's page usually states what was used.
How are multi-part holders assembled?
Common approaches are a snap fit, screws, or glue on a flat joint. The model page describes the intended method and the parts involved.
Can a holder be mounted on a wall?
Wall-mounted versions exist in this collection. Look at how the model is fixed in place, whether through screw holes, adhesive tape or a bracket, and what the author shows in the print photos.
İlgili
Ev ve yaşam

3D Models for Wall-Mounted Remote Control Holders

625197 model
Ev ve yaşam

Remote Holder 3D Models for Wall and Desk Mounts

44483 model
Pratik gereçler

3D Models for Remote Control Holders and Stands

40185 model
Ev ve yaşam

Remote Control Stand 3D Models and STL Files

504326 model
Ev ve yaşam

Air Conditioner Remote Wall Holder STL Models

693043 model
Ev ve yaşam

3D Models for Remote Control Organizers

11063 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç