Alet ve ekipman

UV Lamp Holders: STL Files for 3D Printing

This collection gathers 3D models of holders, stands and brackets made for UV lamps of different kinds. The files cover nail desk lamps, curing lamps for resin work, pegboard mounts and clamp solutions. It is a starting point for 3D printing a mount around the lamp you already own. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 596034 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 596034 model
Kategori hakkında

«UV Lamp Holders: STL Files for 3D Printing»

The models differ mainly in how the lamp is fixed. Nail lamp stands hold a lamp above a work surface, curing brackets grip a tube or a housing, and pegboard or wall mounts attach the lamp to a panel. Clamp, pole and magnetic versions appear where a desk or a frame has to stay clear.

Before printing, measure the lamp tube or housing diameter, the cable exit and the thickness of the surface you want to mount to. Look at the author's page for part count, whether supports are needed, the material and settings listed, and photos of real prints. Lamp heat matters too, so check what material the author used and how much clearance the design leaves around the bulb.

Search results widen if you try other words for the same object: lamp bracket, lamp mount, lamp stand, curing station, resin lamp arm. Related topics such as resin printing accessories, nail desk organization, pegboard storage and aquarium lighting often lead to holders that fit the same lamps. Combining a mount type with a diameter or a lamp shape narrows the list further.

FAQ

Sıkça sorulan sorular

What should I measure before printing a UV lamp holder?
The lamp tube or housing diameter, the length of the lamp, the cable exit position and the thickness of the board or desk edge you plan to attach it to. A few millimetres of difference change how the holder grips.
Do these holders need supports when printed?
It depends on the shape: brackets with overhangs or open clamps often do. The author's page usually states this, and photos of printed parts show how the model was oriented.
Which material works for a holder near a UV lamp?
Authors list the material they used, and it varies with how warm the lamp gets and how much load the holder carries. Check that note together with the wall thickness and the way the part is fixed.
How do I find a holder for a specific lamp?
Search by mount type and size, for example pegboard mount, clamp holder or a tube diameter, then try synonyms such as bracket, stand or arm. Related searches for curing stations and desk lamp accessories often surface the same designs.
İlgili
Aydınlatma

3D Models of Lamp Holders: STL Sockets and Rings

660634 model
Aydınlatma

Lamp 3D Models: STL Files for LED and Night Lights

9674 model
Aydınlatma

3D Models of Lamps: Moon, LED, Voronoi, Lithophane

351311 model
Aydınlatma

Skull Lamp 3D Models: STL Files for 3D Printing

166107 model
Aydınlatma

Castle and Lamp 3D Models to Print

9270 model
Aydınlatma

3D Printing Table Lamps: STL Models to Browse

372657 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç