Pratik gereçler

Charging Holder STL Models for 3D Printing

This collection gathers charging holder STL files for phones, smartwatches, earbuds and small battery setups. The models range from wall-mounted brackets to desk docks and trays that hold a charging board. It helps if you already know which device you want to park while it charges, because the shapes differ a lot. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 510965 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 510965 model
Kategori hakkında

«Charging Holder STL Models for 3D Printing»

The most common group is phone holders: flat wall brackets, angled desk stands and cradles that keep a cable in place. Smartwatch holders are usually shaped around a specific case size, while earbud holders often sit next to a console or on a shelf. A separate group covers cylindrical cells and small charging boards, where the holder keeps contacts aligned.

Before printing, measure the device and the cable connector, and check where the charging coil or port sits on the model. Look at the author's page for the size and scale, the number of parts, whether supports are needed, and the material and settings listed. For wall versions, check how the model is fixed — screw holes, a hook or an adhesive face — and whether the cable can leave the holder without bending sharply.

To narrow the results, try synonyms such as dock, stand, mount, cradle or bracket, and add the device type: phone, smartwatch, earbuds, action camera or battery cell. Related searches like cable management, desk organizer or wall mount often surface holders that are filed under a different name. Adding a material or printer term can also help when you want a model that matches your usual setup.

FAQ

Sıkça sorulan sorular

What should I check before printing a charging holder?
Measure the device thickness and the position of the port or charging coil, then compare them with the dimensions on the model page. Cable routing and the mounting method matter as much as the outer shape.
Do charging holder models need supports?
It depends on the geometry: overhanging arms, hooks and deep cable channels often do. The author's page usually states whether supports are needed and where they go.
How do I find a holder for one specific device?
Search by device type plus a synonym such as dock, stand, mount or cradle. If the exact name gives few results, try the wider category, for example smartwatch charging stand.
Can these holders be mounted on a wall?
Many are designed for a wall, but the fixing method varies: some use screws, others a hook or an adhesive surface. Check the back of the model and the notes on the source page.
İlgili
Pratik gereçler

3D Printing Models for Chargers and Stands

62646 model
Pratik gereçler

Charging Cable Holder 3D Models and STL Files

564614 model
Pratik gereçler

Phone Charger 3D Models: Stands, Mounts and Docks

111126 model
Pratik gereçler

Watch Charging Stand 3D Models and STL Files

12713 model
Pratik gereçler

Charging Port 3D Models: Covers, Plugs, Cleaners

6171 model
Pratik gereçler

Phone Charging Stand 3D Models and STL Files

14140 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç