Yazıcı parçaları

Filament Holder 3D Models: Spool Stands and Mounts

This collection gathers 3D models that hold filament spools, from simple desktop stands to brackets that attach to a printer frame or a pegboard. Most files are made for everyday FDM 3D printing and cover both full spools and small sample swatches. It helps when you want to move a spool off the printer, keep it steady, or store several reels in one place. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 525938 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 525938 model
Kategori hakkında

«Filament Holder 3D Models: Spool Stands and Mounts»

The models split roughly into a few groups. Desktop and table stands rest on their own base and are usually the largest prints. Modular stands and rack systems let you add or remove sections, while printer-specific mounts and sensor holders are shaped around a particular machine. Pegboard brackets and clips are the smallest pieces, often printed in a batch.

Before printing, look at the spool diameter and width the author lists, the bore size of the centre hole, and the total height of the stand. Check how many parts the model has and whether they press together, bolt together or need glue. On the author's page, read the recommended material and settings, and look at photos of real prints to judge how the bearing surfaces and the roller or axle behave under a loaded spool.

If the results feel narrow, try other wordings: spool holder, spool stand, reel holder, filament rack, filament clip, filament guide, or sensor mount. Adding a printer model, a desk, a wall or a pegboard narrows the list further, and related topics such as dry boxes, filament storage and spool adapters often appear alongside these models.

FAQ

Sıkça sorulan sorular

What measurements should I check before printing a filament holder?
Look at the spool diameter and width, the centre hole size, and the overall height of the stand. The author's page usually states which spool sizes the model was drawn around.
Do these holders need supports?
It depends on the shape. Flat bases and simple brackets often print without them, while overhanging arms and curved cradles may need them. The author's page usually says which orientation was used.
Which filament works for a spool holder?
Authors list their own material choice, and stiffer filaments are common for load-bearing arms. Check the listed settings and consider how much weight the spool adds.
Can a holder be mounted on a printer frame or a pegboard?
Yes, several models are drawn as brackets for a printer frame, a wall or a pegboard. Check the hole spacing and screw sizes the author lists before printing.
İlgili
Yazıcı parçaları

Filament Spool Holder STL Models for 3D Printing

16953 model
Yazıcı parçaları

Filament Fastening 3D Models and STL Files

2836 model
Yazıcı parçaları

Anycubic Spool Holder 3D Models and STL Files

12641 model
Yazıcı parçaları

Filament Winder 3D Models: STL Files for Spool Rewinding

4538 model
Yazıcı parçaları

Anycubic Mega Spool Holder STL Models

8815 model
Alet ve ekipman

Filament Drying STL Models for 3D Printing

13418 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç