Pratik gereçler

3D Models for Scooter and Camera Mounts: STL Holders

This collection gathers STL files for holders and mounts that attach phones, action cameras, bags and small parts to scooters, bikes and helmets. Most of them are small printed parts, so they are a practical first project on a 3D printer. The range also includes goalpost-shaped and trophy-style stands for display. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 41 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 1383 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1383 model
Kategori hakkında

«3D Models for Scooter and Camera Mounts: STL Holders»

The models fall into a few groups. Handlebar clamps hold a phone or a camera in front of the rider, while helmet and frame mounts fix an action camera to a curved surface. Scooter accessory mounts carry bags, turn signals or trackers, and bike brackets position a light or a rear-facing camera. Display pieces shaped like a goalpost or a trophy form a separate group with no load to carry.

Before printing, read the author's page for the tube or bar diameter the clamp is built around, since a few tenths of a millimeter decide whether it grips or rattles. Check how many parts the mount has, whether they screw, slot or glue together, and whether the author lists supports, material, infill or orientation. Photos of real prints show how the part sits on the vehicle and where it may flex.

If a search returns little, try other names for the same object: bracket, cradle, clamp, adapter, base or puck instead of holder. Related topics include handlebar accessories, action camera cages, scooter bags, helmet mounts and display stands. Combining a device name with a mounting point, such as handlebar or stem, usually narrows the results faster than a single broad word.

FAQ

Sıkça sorulan sorular

How do I know a mount will fit my scooter or bike?
Compare the diameter and shape given on the model page with the bar or tube you plan to attach it to. If the author lists no dimensions, the file may need scaling or a shim.
Do these mounts need supports when printed?
It depends on the geometry: clamps with overhangs and screw holes often do. The model page usually states whether supports were used and in which orientation the part was printed.
Which material is used for parts that carry a phone or camera?
Authors often list the filament they printed with, and stiffer materials are common for load-bearing clamps. Check that page rather than assuming a default.
What should I search for if I cannot find the exact accessory?
Try synonyms such as bracket, cradle, clamp or adapter, and add the mounting point, for example handlebar or stem. Searching by the device type alone often returns too many unrelated results.
İlgili
Pratik gereçler

Elektrikli scooter için 3D model tutucular

3986 model
Pratik gereçler

Elektrikli scooter için 3D telefon tutucu

4842 model
Pratik gereçler

Metalcardbot 3D Model Koleksiyonu

2345 model
Pratik gereçler

PS4 için 3D model: konsol ve denetleyici standları

751135 model
Pratik gereçler

3D Printing Accessories for DJI Osmo Mobile SE

2336 model
Pratik gereçler

AirPods Pro 2 için 3D model ve STL dosyaları

382914 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç