Alet ve ekipman

Walkie-Talkie Holders: 3D Models and STL Files

This collection covers STL files for walkie-talkie holders used in 3D printing. You will find belt clips, MOLLE mounts, desk stands and vehicle brackets, along with decorative shells and prop-style radios. The variety helps you match a holder to a specific radio size or carrying setup. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 3321 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 3321 model
Kategori hakkında

«Walkie-Talkie Holders: 3D Models and STL Files»

Belt clips and holsters are shaped around a radio body, while MOLLE mounts use webbing slots for packs and vests. Desk stands and shelf holders keep a radio upright in a room. Vehicle brackets often use ball joints or fixed cradles, and decorative shells or prop-style radios serve display or costume use.

Before printing, check the radio dimensions and the holder opening on the author's page, because small differences in width or depth change the fit. Review the number of parts, how they join, and whether supports are needed for overhangs. The material and settings listed by the author give a starting point, and photos of real prints show how the holder sits on a belt, pack, or dashboard.

If a first search returns too few results, try synonyms such as radio holster, two-way radio mount, or handset bracket. Related searches include belt clip, chest harness, dashboard cradle, and workshop wall holder. Adding a radio size, a mounting type, or a carrying context to the query narrows the list further.

FAQ

Sıkça sorulan sorular

What measurements should I check before printing a walkie-talkie holder?
Check the radio width, thickness, height, and belt clip position on the author's page. Compare those numbers with the holder opening and mounting points. A small difference can affect how the radio sits.
Which materials work for a walkie-talkie holder?
The author's page may list a material and settings for the model. Rigid filaments are common for clips and stands, while flexible filaments can be used where the holder needs to bend. The choice depends on the mounting method and the load.
How do MOLLE mounts differ from belt clips?
MOLLE mounts attach through webbing on packs or vests and usually spread the load across a panel. Belt clips are smaller and sit directly on a waistband or strap. The model page should show the attachment method and the space it needs.
Can I change the size of a walkie-talkie holder in the slicer?
Scaling a model changes both the radio opening and the mounting points, so it may no longer match the intended hardware. If the author provides separate parts or a parametric file, check those options on the source page. Otherwise, look for a model drawn for the radio size you have.
İlgili
Elektronik

3D Models of Walkie-Talkies and Radio Accessories

7933 model
Pratik gereçler

3D Models for Radio Holders and Mounts

528974 model
Pratik gereçler

Walkie-Talkie Holders: 3D Models and STL Files

535398 model
Taşıtlar

3D Models for Walkie-Talkie Handlebar Mounts

2388 model
Pratik gereçler

3D Models for Radio Mounts: Dash, Visor and Belt

179953 model
Alet ve ekipman

Radio Headset and Walkie-Talkie 3D Models

8562 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç