Bahçe

Garden Hose Holder STL Models for Wall and Fence

This collection gathers 3D models that hold, hang and guide a garden hose: wall brackets, fence clamps, hooks and small holders for connectors. Most of them are simple parts, so they are a common first project for a 3D printer. The variety comes from mounting style and hose diameter rather than from the shape itself. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 4567 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 4567 model
Kategori hakkında

«Garden Hose Holder STL Models for Wall and Fence»

The models split mainly by how they attach. Wall holders screw into masonry or a post, fence versions clamp onto mesh or a rail, and guide hooks sit low to keep the hose from dragging across beds and paths. Some pieces hold the hose itself, others hold the coupling, a spray head or a set of connectors in numbered slots.

Before printing, open the model page and read the dimensions the author lists: the hose diameter in inches or millimetres, the wall thickness of the bracket and the screw hole spacing. Check how many parts the file contains and whether they are meant to be glued, screwed or snapped together. Material and settings matter here, since a thin bracket left in sun and under load behaves differently from a thick one, and photos of real prints show more than a render.

If the first search gives few results, try other wordings: hose hanger, hose reel bracket, tap connector holder, drip irrigation clip, cable and hose guide. Related topics include garden tool holders, sprinkler and nozzle stands, and general wall hooks, which often use the same mounting logic and can be adapted to a hose.

FAQ

Sıkça sorulan sorular

What do I need to measure before printing a hose holder?
The outer diameter of the hose, the width of the rail or post it mounts to, and the screw or anchor size you plan to use. Authors usually list these on the model page.
Which material works for an outdoor hose holder?
Many people print these in PETG or ASA because they tolerate moisture and sun better than standard PLA. The author's page often names a material and wall count.
Do these models need supports?
It depends on the shape. Flat-backed brackets often print without them, while hooks and curved guides may need supports under the overhang. Check the print notes on the model page.
Can a holder be scaled to fit a different hose size?
Scaling changes every dimension, including screw holes and wall thickness. It is often better to look for a version made for your diameter or to adjust the model in CAD.
İlgili
Bahçe

Garden Hose Holder 3D Models: Wall Mounts and STL Files

620150 model
Bahçe

Garden Hose Hook and Rebar Mount 3D Models

2747 model
Bahçe

3D Bahçe Hortumu Tutucu: Varil İçin 3/4 Model

5055 model
Bahçe

Bahçe Hortumu Tutucu 3D Model ve STL Dosyaları

12065 model
Bahçe

3D Yazıcı için Bahçe Hortumu Modelleri

7135 model
Bahçe

3D Models for Pool and Garden Hose Mounts

12148 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç