Alet ve ekipman

28 mm Pipe and Tube Holder STL Models

This collection gathers STL files for 28 mm pipe and tube holders, from simple clips to wall brackets and rod mounts. You can compare how different designs attach, how many parts they use, and what hardware the author lists. It helps you find a starting point for a repair, a workshop jig, or a household fixture. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 6317 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 6317 model
Kategori hakkında

«28 mm Pipe and Tube Holder STL Models»

The models fall into a few practical groups: wall and ceiling mounts for rods, screw-on clips for tubes, wardrobe and rail holders, water and garden pipe brackets, and stands for smoking pipes. They differ in clamp shape, screw hole spacing, how much of the tube they cover, and whether they are single parts or assemblies. Some are open clips that snap over a tube, while others are closed rings that slide on from an end.

Before printing, measure the outer diameter of your tube rather than relying on a nominal size, and check the gap the holder leaves for the tube. Look at the author's page for screw hole spacing, wall thickness, part count, and whether supports are needed. The material and settings the author lists matter for indoor or outdoor use, and photos of real prints show how the holder sits against a surface.

To refine the search, try synonyms such as pipe clamp, tube bracket, rod mount, curtain rod holder, wardrobe rail holder, water pipe clip, or smoking pipe stand. Add the tube diameter, mounting type, and the surface you plan to attach it to. Related searches include cable clips, hose holders, and workshop organizers, which use similar clamp geometry.

FAQ

Sıkça sorulan sorular

How do I measure a pipe for a 28 mm holder?
Use calipers to measure the outside diameter of the tube, since pipe and tube sizes can be given as nominal values. Check the author's notes for the exact diameter the model is drawn around.
What is the difference between a pipe clip and a pipe holder?
A clip usually grips a tube with a partial ring and often mounts with one or two screws. A holder may be a full ring, a bracket, or an assembly that supports a rod or pipe along a wall or ceiling.
Can I scale a 28 mm holder for a different tube size?
Scaling changes wall thickness, screw holes, and the fit of any moving parts, so it may not match the original design. Check whether the author provides a parametric file or notes for other diameters.
Which material should I use for a pipe holder?
The choice depends on the load, indoor or outdoor exposure, and the finish you want. The author's model page often lists a material and print settings that were used for the design.
İlgili
Ev ve yaşam

Pipe Holder STL Files for 3D Printing: Pool and Wall

551311 model
Alet ve ekipman

PVC Pipe Holders: 3D Models and STL Files

530733 model
Ev ve yaşam

25mm Pipe Holder 3D Models: Clamps and Mounts

676856 model
Ev ve yaşam

3D Models for 28 mm Brackets and Mounts

12503 model
Nesneler

3D Models of Pipes, Fittings and Holders

51139 model
Minyatürler ve savaş oyunları

28mm Adapters and Terrain: 3D Models to Print

12437 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç