Ev ve yaşam

Dishwasher Lock and Spare Parts STL Models

This collection gathers STL files for the parts around a dishwasher door and basket: latches and catches, child-lock button covers, feet and fixing plugs, rail rollers and salt lid handles. It is useful when a small plastic piece breaks and a full appliance repair is not practical. Each listing points to the source page, where dimensions can be compared before 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 37134 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 37134 model
Kategori hakkında

«Dishwasher Lock and Spare Parts STL Models»

Door lock parts differ in shape: some are sliding latches with a spring seat, others are simple catches or striker plates, and some are printed as two pieces that snap together. Child-lock covers and button guards are usually thin shells that sit over a control panel. Feet, fixing plugs and rail end caps are small structural parts, while salt lid handles, funnels and knobs are handled often and tend to have a grip or a thread.

When you open a model page, compare the listed dimensions with the broken part and note the mounting points, screw holes and pin positions. Check how many parts the model contains, whether assembly is required, and whether the author calls for supports. Look at the material and settings the author lists, and at photos of real prints, to judge wall thickness in thin clips and latch arms.

Search results improve when you use the words printed on the part or in the manual: latch, catch, striker, door hook, button guard. For basket parts try rail, roller, end cap or guide; for the salt area try lid, cap, funnel or opener. Adding the appliance brand, or a part number read from the label, narrows the list further.

FAQ

Sıkça sorulan sorular

Which measurements matter for a dishwasher door lock part?
Note the overall length and width, the distance between mounting holes, and the position of the latch hook relative to the door edge. Compare these with the dimensions on the model page rather than judging by the photo alone.
Do printed dishwasher lock parts need supports?
It depends on the geometry: latches with overhangs or a spring channel often do, while flat covers and end caps usually do not. The author's page states the orientation and support settings they used.
How do I find basket rail and roller parts for a dishwasher?
Try terms such as rail, roller, wheel, end cap and guide, combined with the appliance brand. Basket hardware is often listed separately from door parts, so search both.
What should I check on a child lock button cover model?
Compare the button layout and spacing with the control panel, and check how the cover is held in place. Also look at the wall thickness, since thin covers flex more when pressed.
İlgili
Ev ve yaşam

Dishwasher Lock 3D Models and STL Parts

26706 model
Ev ve yaşam

Candy and Dishwasher Lock 3D Models in STL

2812 model
Ev ve yaşam

Dishwasher Lock and Door Parts: 3D Models and STL

38237 model
Ev ve yaşam

Dishwasher Parts and Signs: 3D Models to Print

4394 model
Ev ve yaşam

3D Models for Dishwasher Door Locks and Latches

1575 model
Ev ve yaşam

Dishwasher Lock Parts: 3D Models and STL Files

82211 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç