Elektronik

DJI Matrice 30 STL Models: Parts and Accessories

This collection gathers STL files for parts and accessories made for the DJI Matrice 30 series, along with models of the aircraft itself. You will find protective caps, mounts, brackets, landing gear pieces and battery carriers. It helps when a small component is missing or when you want to adapt the airframe for another payload. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 30774 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 30774 model
Kategori hakkında

«DJI Matrice 30 STL Models: Parts and Accessories»

Most entries fall into a few groups. Shell and body models reproduce the outline of the aircraft, while smaller parts address specific points on the airframe: caps that close off openings, brackets that hold accessories, and feet or hinges that take wear. Some files are single pieces, others are sets containing several identical parts.

Before printing, read the author's notes on the model page: overall size and scale, how many separate parts are involved, whether supports are needed, and the material and settings the author lists. Photos of real prints show how a part sits on the airframe and where tolerances matter. Thin covers and small caps often print in one piece, while brackets and landing gear parts may call for a stronger material or denser infill.

If the results look thin, try other spellings and related terms: the series appears with and without the T suffix, and part names vary between cap, plug, cover and blanking plate. Searching the wider Matrice family, or for the accessory itself rather than the aircraft, often turns up files that also apply here.

FAQ

Sıkça sorulan sorular

Which parts of the Matrice 30 are usually covered by printable files?
Protective caps and covers, mounts and brackets, landing gear feet and hinge pieces, and carriers for batteries. Body and shell models also appear in the same results.
Do these files need supports?
It depends on the shape. Flat covers and caps often print without them, while brackets with overhangs may need them. The author's page usually states what the model involves.
How do I find a part if I do not know its name?
Search by function rather than name, using words such as cover, plug, mount, bracket, foot or hinge, and add the aircraft series. Trying the wider Matrice family can also help.
What should I check before printing a replacement part?
Compare the dimensions and mounting points described on the author's page with the part you want to replace, and look at photos of printed examples. Material and layer settings affect how a thin or load-bearing part behaves.
İlgili
Elektronik

DJI Matrice 4 3D Models and STL Accessories

127127 model
Pratik gereçler

DJI Matrice 3D Models and STL Drone Parts

13891 model
Pratik gereçler

DJI Matrice 4T 3D Models and STL Accessories

153565 model
Taşıtlar

E30 3D Models: Car Replicas, Scale Parts, Bases

50511 model
Pratik gereçler

Matrice 3D Models: Drone, LED and Mold STL Files

8133 model
Pratik gereçler

DJI Matrice 4T Accessories: 3D Models and STL Files

7313 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç