Pratik gereçler

DJI Mini 4K 3D Models: Cases, Guards and STL Parts

This collection gathers STL files built around the DJI Mini 4K body: travel cases, propeller guards, landing gear, stands and small add-ons. It is useful when you want to replace a lost part or add protection that the stock drone does not include. Each listing links to the author's page, where the dimensions and print settings are described for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 393746 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 393746 model
Kategori hakkında

«DJI Mini 4K 3D Models: Cases, Guards and STL Parts»

The models fall into a few groups. Cases and boxes enclose the drone, and sometimes the controller as well, and differ in whether they use a hinged lid, a sliding top or magnets. Propeller guards and blade protectors clip onto the arms or wrap around the motors, while landing gear and skids raise the body off the ground. Stands and mounts hold the drone or the remote in place on a desk or a wall.

Before printing, read the author's page rather than relying on the thumbnail. Check the stated size and scale, the number of parts and how they join, whether supports are needed, and the material and layer settings the author lists. Photos of real prints are the most useful signal for clip fits and snap joints, since thin arms and tight tolerances behave differently on different machines.

If a search returns too little, try other words for the same object: prop guard, blade protector, landing skids, feet, travel case, hard case, mount or holder. Related searches include the controller, battery, gimbal cover and camera, and parts made for other drones in the same series often appear alongside Mini 4K items, so check the dimensions before assuming a match.

FAQ

Sıkça sorulan sorular

What kinds of parts are made for the DJI Mini 4K body?
Most commonly cases and storage boxes, propeller guards, landing gear and feet, plus stands and small accessories such as battery tools. The mix changes as authors publish new files.
How do I know a printed part will fit my drone?
Compare the dimensions given on the model page with your own measurements, and look at photos of finished prints. Notes about scale and tolerances matter more than the title.
Do propeller guards or landing gear need supports?
It depends on the geometry and the orientation the author recommends. Some designs are split into two halves or printed flat to avoid overhangs; the model page usually states this.
Can I scale a model up or down to fit?
Scaling changes wall thickness and the clearance of clips and joints, so a resized part may no longer hold. It is safer to look for a file drawn for your drone.
İlgili
Pratik gereçler

3D Models for DJI Mini 4K Drone Accessories

3726 model
Pratik gereçler

DJI Mini 3 Accessories: 3D Models and STL Files

1260928 model
Pratik gereçler

DJI Mini 3 Stand 3D Models and STL Files

12035 model
Pratik gereçler

DJI Mini 5 Pro 3D Models: Guards, Cases, Mounts

4110 model
Pratik gereçler

DJI Mini 4 Pro 3D Models and STL Accessories

4407 model
Pratik gereçler

DJI Mini 3 wall mounts: STL models for 3D printing

7216 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç