Elektronik

18650 Battery Holders and Storage Boxes: 3D Models

This collection gathers STL files for 18650 cells: storage boxes, snap-latch cases, stackable holders and spacers. Most designs are small parts that fit on a standard 3D printer bed. It helps when you need to organise loose cells or assemble a pack and want the geometry already worked out. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 10633 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 10633 model
Kategori hakkında

«18650 Battery Holders and Storage Boxes: 3D Models»

The models fall into a few groups. There are closed boxes with slide tops or snap latches, open trays and baskets, stackable couplers that join cells side by side, thin spacers used while spot welding, and shells shaped for tool battery packs. They differ mainly in how many cells they take, how the lid closes, and whether the cells sit loose or are clamped.

Before printing, read the author's notes on the model page. Check the internal dimensions against the diameter and length of your cells, the wall thickness, the number of separate parts and how they join, and whether the design needs supports or a particular material and layer height. Photos of finished prints show how the tolerances actually behave better than a render does.

If the results look thin, try other wordings: cell holder, battery case, battery tray, pack spacer, welding jig, or the cell size written with different spacing. Related searches include 21700 and 26650 holders, AA and AAA cases, tool battery adapters, and modular pack systems that combine several holders into one block.

FAQ

Sıkça sorulan sorular

What should I measure before printing an 18650 holder?
Measure the actual diameter and length of your cells, since protected or wrapped cells can be slightly larger than the nominal size. Compare those numbers with the internal dimensions given on the model page.
Do these holders need supports?
It depends on the design. Flat trays and simple boxes often print without them, while closed shells, latches and overhangs may need supports. The author's page usually states what the file was sliced with.
Can I use these models for other cell sizes?
Some holders are drawn for a specific size, but scaling or searching for 21700, 26650 or AA versions is common. Check that the wall thickness and latch clearances still work after any scaling.
Which material works for battery holders?
Many people print them in PETG or ABS for a bit more heat resistance, and PLA for cooler indoor storage. The model page often lists the material and settings the author used.
İlgili
Elektronik

18650 Battery Case STL Models for Storage and Packs

124713 model
Elektronik

18650 Pil Lehim Tutucu 3D Model ve STL Dosyası

11345 model
Elektronik

18650 Pil Saklama Kutusu 3 Adet için 3D Model

1359081 model
Elektronik

18650 Pil Tutucu ve Kutu İçin 3D Model ve STL

18640 model
Elektronik

18650 pil için 3D model kasa

151636 model
Elektronik

18650 Case and Holder STL Files for 3D Printing

124425 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç