Pratik gereçler

3D Models for Electric Scooter Parts and Accessories

This collection brings together 3D-printable additions for electric scooters, from practical mounts and covers to body and control parts. It is useful when a small missing or broken piece is hard to find as a spare. Each listing points to STL files that can be prepared for a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 32410 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 32410 model
Kategori hakkında

«3D Models for Electric Scooter Parts and Accessories»

Mounts and hooks range from simple brackets to adjustable arms that hold a bag or helmet. Covers and caps protect charging ports and hardware from dust and water, while fenders and mudguards address spray from the wheels. Control parts such as grips, handlebar clamps and turn-signal housings sit closer to the rider, and drivetrain components include pulleys, mounts and traction aids.

Before printing, compare the author's stated dimensions with your scooter's tube diameter, bolt spacing and clearance around moving parts. Check the number of parts, whether assembly hardware is required and whether the model needs supports. The material and settings listed on the page matter for parts that see load, vibration or weather, so review photos of real prints and any notes about orientation.

Search terms can be narrowed by part function, such as hook, charging cap, fender, mudguard, throttle grip or basket. Related queries include scooter accessories, replacement parts, handlebar mount and rear light bracket. If a result is close but not exact, try synonyms for the same area, like cover versus cap, or mudguard versus fender.

FAQ

Sıkça sorulan sorular

What can be 3D printed for an electric scooter?
Common parts include hooks, bag mounts, charging-port covers, fenders, mudguards, grips and small drivetrain components. The exact range depends on the scooter and the files available.
How do I know if a part will fit my scooter?
Check the dimensions, tube diameter, bolt spacing and mounting points shown on the model page. Compare them with your scooter before printing.
Do these parts need special filament?
The author's page usually lists the material and settings used. For outdoor or load-bearing parts, review those notes and the print photos.
Can I adapt a model to a different scooter?
Some files are parametric or include editable dimensions, which can help with small changes. Otherwise, scaling or modifying the mesh may be needed.
İlgili
Nesneler

3D Models of E-Scooter Fenders and Wings to Print

32752 model
Pratik gereçler

3D Models for Electric Scooter Huggers and Fenders

3400 model
Nesneler

3D Models for Electric Scooter Mudguards and Fenders

24370 model
Pratik gereçler

3D Models for Scooter Light Brackets

187501 model
Taşıtlar

Bracket and Hook 3D Models for Electric Scooters

48842 model
Taşıtlar

3D Models for Electric Scooter Fender Mounts

2747 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç