Ev ve yaşam

3D models for air conditioner parts: STL files to print

This collection gathers STL files for parts that sit around split and portable air conditioners: wall brackets, duct and window adapters, drain fittings, remote holders and small decorative pieces. Most of them are compact shapes that fit a 3D printer with a standard build volume. The list helps when an original part is missing or when a stock size does not match your window or wall. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 38906 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 38906 model
Kategori hakkında

«3D models for air conditioner parts: STL files to print»

Brackets and wall holders are usually flat shapes with screw holes, while duct adapters are round or rectangular transitions between a hose and a window opening. Drain parts, such as siphons and connection pieces, work with condensate lines and often end in a threaded or push-fit joint. Decorative trims and small pins differ from the rest: they are cosmetic or mechanical details rather than structural elements.

On the author's model page, look at the stated dimensions and scale first, then at the number of separate parts and how they join. Check whether the author lists the material and print settings, and whether supports are needed for overhangs. Photos of real prints help you judge wall thickness and how the part meets a hose, a pipe or a screw hole.

Search terms can be narrowed by unit type: portable, split or window air conditioner, and by function, such as exhaust, drain, bracket or remote holder. Related queries include duct flange, hose adapter, condensate trap and wall mount. Adding a hose or pipe diameter in millimetres usually brings more precise results.

FAQ

Sıkça sorulan sorular

What can be printed for an air conditioner?
Common items are wall brackets, window and duct adapters for portable units, drain and condensate fittings, remote control holders and small decorative or replacement parts.
How do I pick the right size for a duct adapter?
Measure the hose diameter and the opening it has to pass through, then compare those figures with the dimensions on the model page. A few millimetres of difference decides whether the adapter sits tightly or needs extra sealing.
Which material do authors use for these parts?
Brackets and holders are often printed in PETG or ABS, while indoor adapters are frequently printed in PLA. The material and settings listed by the author are the reference point, since they affect how the part behaves near heat or sunlight.
Do these models need supports?
It depends on the geometry: flat brackets usually print without them, while round adapters with overhangs may need them. The model page or the included files often show the orientation the author used.
İlgili
Ev ve yaşam

Air Conditioner Adapter STL Models for Venting

7916 model
Ev ve yaşam

Desktop Air Conditioner 3D Models and STL Files

2774 model
Ev ve yaşam

Air Conditioner Cap and Vent STL Models

12345 model
Ev ve yaşam

3D Models for Mobile Air Conditioner Parts and Ducts

38448 model
Ev ve yaşam

3D Models for Air Conditioner Louvers and Vents

4093 model
Ev ve yaşam

3D Models for Air Conditioner Spacers and Adapters

93135 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç