Elektronik

SSD and Memory Card Holders: 3D Models to Print

This collection covers 3D models for holding, mounting, and adapting SSDs and memory cards. You will find desktop organizers, PCI brackets, and housings for 2.5-inch drives. It helps when you need a specific STL for a board or a tidy storage spot. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 69257 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 69257 model
Kategori hakkında

«SSD and Memory Card Holders: 3D Models to Print»

Holders range from simple cradles for a single 2.5-inch SATA drive to multi-slot organizers that also take SD cards and USB sticks. Adapters and housings are shaped around specific board sizes, such as M.2 or mSATA, and often include cutouts for ports. Mounts for PCI brackets or rack shelves serve a different purpose: they fix a drive inside a case or a server chassis.

Before printing, check the dimensions the author lists against your drive or board, since a few millimeters can decide whether a card slides in. Look at the number of parts and whether the design needs screws, inserts, or supports. The material and settings the author notes matter for thin clips and snap fits; photos of real prints show how the tolerances hold.

If you do not find the exact shape, try synonyms like 'caddy', 'bracket', 'tray', or 'enclosure' together with the drive type. Related topics include cable organizers, drive docks, and modular storage bins. Adding the interface, such as SATA, NVMe, or USB, narrows the results further.

FAQ

Sıkça sorulan sorular

What is the difference between an SSD holder and an SSD adapter?
A holder keeps a drive in place on a desk or inside a case, while an adapter changes the physical or electrical connection, for example from mSATA to SATA. Some models combine both functions in one part.
How do I choose the right size for a 2.5-inch SSD?
Check the length, width, and thickness the author lists, because 2.5-inch drives vary slightly between models. Also confirm the mounting hole pattern if the holder uses screws.
Can I print a mount for an M.2 NVMe drive?
Yes, there are brackets and trays designed for M.2 boards, often for PCI slots or small cases. Look for the board length and whether the design accounts for the connector height.
What should I check on the model page before printing?
Review the dimensions, part count, and any required hardware such as screws or heat-set inserts. The author's material and settings notes, along with photos of real prints, help you judge how the part will fit.
İlgili
Elektronik

3D Models for SSD Board Enclosures and Mounts

180901 model
Elektronik

SSD Board Housings: 3D Models and STL Files

4648 model
Elektronik

3D Models for SSD Cases and Enclosures

130449 model
Elektronik

Board Holder STL Models for 3D Printing

14837 model
Elektronik

3D Models for Circuit Board Enclosures and STL Cases

211397 model
Elektronik

3D Printing Motherboard Mounts, Covers and Rack Panels

1281 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç