Ev ve yaşam

3D Models for Toothpaste Tubes: Stands and Squeezers

This collection gathers STL files that organize and empty toothpaste tubes: stands, squeezers, wall holders and travel variants. It helps if you want a tidier sink area or a way to use the last of the paste. Most parts are small, so they fit a standard 3D printer bed. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 9260 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 9260 model
Kategori hakkında

«3D Models for Toothpaste Tubes: Stands and Squeezers»

The models fall into a few groups. Stands hold a tube upright or lay it at an angle, squeezers and presses flatten the tube from the crimped end, and wall holders or organizers combine the tube with a toothbrush or razor. Travel and kids' versions are shorter and use less material, while parametric files let you enter your own tube dimensions.

Before printing, read the author's page for the tube width the model was drawn around, since tubes differ between brands and sizes. Check the wall thickness and clearances on the roller or slot, whether supports are needed, and which material and layer height the author lists. Photos of real prints show how the part sits on a shelf and whether the tube stays in place.

Search results improve when you try several names for the same object: tube squeezer, tube press, dispenser, выдавливалка, отжимка. Related queries cover bathroom organizers, toothbrush holders, cosmetic and cream tubes, paint and glue tubes, and parametric tube models. Combining a shape word with a room or a use usually narrows the list faster than one broad term.

FAQ

Sıkça sorulan sorular

How do I pick the right size for my toothpaste tube?
Measure the width of the crimped end and the diameter of the tube body, then compare those numbers with the dimensions on the model page. Parametric files let you enter the measurement directly instead of scaling a fixed model.
Which material works for a bathroom holder?
PLA is common for small indoor parts, while PETG is often chosen where moisture and flexing matter. The author's page usually names a material and settings; follow those rather than guessing.
Do these models need supports?
Flat stands and simple rollers often print without them, while wall brackets with overhangs may need supports. Check the orientation shown in the author's photos and the notes on the model page.
Can the same squeezer be used for other tubes?
Many are drawn for cosmetic, paint or glue tubes as well, as long as the tube width fits the slot. Confirm the inner dimensions before printing.
İlgili
Ev ve yaşam

Toothpaste Dispensers and Tube Squeezers: 3D Models

2703 model
Ev ve yaşam

Toothpaste Tube Squeezers and Caps: 3D Models

51858 model
Yazıcı parçaları

Pasta 3D Models and STL Files for Kitchen Tools

21991 model
Ev ve yaşam

3D Models for Dental Care: STL Holders and Boxes

12830 model
Ev ve yaşam

Toothbrush Holders and Cases: 3D Models to Print

16227 model
Ev ve yaşam

3D Models for Toothpaste Tube Squeezers and Holders

12454 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç