Taşıtlar

Dnipro-M Battery Adapters and Holders: 3D Models

This collection gathers 3D-printable parts built around Dnipro-M cordless tool batteries: holders, wall mounts, adapters and small workshop accessories. It is useful when you want to organize battery packs, link one tool system to another, or replace a broken plastic piece. Most of these files are plain STL geometry, so the result depends on the dimensions and settings you print with. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 294 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 294 model
Kategori hakkında

«Dnipro-M Battery Adapters and Holders: 3D Models»

The largest group covers holders and mounts: simple cradles that keep a battery pack on a wall, a bench or a rail, and versions that attach to a board or a tool holder. Adapters form a second group, converting a battery interface from one brand to another or stepping voltage down through a DC-DC converter, sometimes with a USB output added. A smaller set deals with tool accessories such as vacuum and blower adapters, clips, and motorcycle parts for older Ural and Dnipro machines, which follow completely different dimensions.

When choosing a file, open the model page and read what the author measured: the battery interface, wall thickness, screw holes and the number of separate parts. Check whether supports are needed, how the part is oriented on the build plate, and which material and layer height the author lists. Battery interfaces carry load and heat, so wall count and infill matter more than on decorative prints; photos of real prints show how the latch and the contacts line up.

If a search comes up short, try synonyms and related wording: battery cradle, battery dock, pack mount, terminal cover, connector housing, or the voltage written in different ways. Searching by tool type, such as sander, grinder or blower, often surfaces adapters that a brand name misses. Related topics worth checking are workshop organization, battery storage racks and adapters between other cordless systems.

FAQ

Sıkça sorulan sorular

What do I need to measure before printing a battery holder?
Measure the battery interface itself: the rail width, the depth of the slot, the position of the latch and the contact block. Also note the screw hole spacing if the part is meant to be fastened to a wall or a board.
Which material works for adapters that carry current?
The plastic body only holds the contacts, so stiffness and heat resistance matter more than flexibility. Look at what the author lists, and keep in mind that the electrical side — contacts, wiring and insulation — is your own responsibility.
Why do some models include several separate parts?
Multi-part designs usually split the body so it prints without long bridges or heavy supports, then lock together with screws or clips. Check the assembly notes and the clearances the author gives before scaling anything.
Can I search by voltage instead of brand?
Yes. Terms like 12V, 18V or 20V adapter, DC-DC converter or step-down module often bring up files that a brand name alone does not. Combining a voltage with a tool type narrows the list further.
İlgili
Taşıtlar

Dnepr Motorcycle 3D Models: STL Parts and Scale Kits

15736 model
Yazıcı parçaları

Dnepr MT-11 Air Filter Housing 3D Models & STL

169807 model
Taşıtlar

Toyota Emblem and Grille 3D Models to Print

50330 model
Taşıtlar

Car Footwell Air Blower 3D Models and STL

11875 model
Taşıtlar

Hyundai Creta 3D Models and STL Files for Printing

2659 model
Taşıtlar

Skoda Octavia RS 3D Models and STL Files

2399 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç