Nesneler

Double-Buckle 3D Models: STL Straps and Webbing Hardware

The collection gathers double-buckle 3D models: side-release and snap buckles, D-ring and ladder-lock adjusters, and bar buckles sized for webbing and straps. Most are small parts meant for a 3D printer, so one plate can cover several variants. It helps when you need to replace a broken buckle or match hardware to a bag, harness or strap project. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 45 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 43290 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 43290 model
Kategori hakkında

«Double-Buckle 3D Models: STL Straps and Webbing Hardware»

Side-release buckles split into two halves and clip together, while D-ring and ladder-lock pieces hold webbing at an angle or let you shorten a strap. Double-bar and double-sided adjusters act as simple tensioners on a length of webbing. Some entries use the word double for mechanisms such as spring-loaded cases or twin-barrel assemblies, so read the description rather than the title alone.

On the author's model page, check the strap width the buckle is drawn for, the thickness around the latch, and whether the part is one piece or an assembly with pins. Look at the material and layer settings the author lists, and at photos of real prints to see how the latch and bar come out. Orientation matters: parts printed flat keep layer lines away from the point that bends.

If a search returns little, try synonyms such as side-release, snap, ladder lock, tri-glide, D-ring, webbing and strap adjuster. Related topics like paracord slings, harness hardware, bag repair and backpack straps often lead to the same parts. Adding a width to the query, for example 20 mm or 25 mm, narrows the results quickly.

FAQ

Sıkça sorulan sorular

What does double buckle mean in these models?
It usually means a buckle with two bars, two rings or two latch sides, so a strap can be threaded twice or joined from both ends. The word also appears on unrelated parts that simply have two of something.
Which strap width should I search for?
Measure the webbing you plan to use and search that width, since buckles are drawn around a specific strap size. A part made for a wider strap will not close around a narrow one.
Do these models need supports?
It depends on the shape: flat buckles with open gaps often print without them, while overhanging latches may need them. The author's page usually states the orientation and settings used.
Can I scale a buckle in the slicer?
Scaling changes the strap opening as well as the latch, so a resized part may no longer match your webbing. Check the dimensions listed on the model page before adjusting the scale.
İlgili
Nesneler

Double Ring 3D Models: STL Files for Fidgets and Holders

4559 model
Nesneler

3D Models of Buckle Clips: STL Files for Straps and Belts

3826 model
Alet ve ekipman

Fastex Buckle 3D Models: STL Side-Release Buckles

2026 model
Moda ve aksesuarlar

25 mm Buckle STL Models for Straps and Webbing

2903 model
Nesneler

Quick Release Buckle 3D Models and STL Files

6851 model
Pratik gereçler

3D Models for Dual Drone Battery Holders and Mounts

6611 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç